How to Calculate the Top Vibration Metrics for Long-Term Maintenance

Vibration signals are complicated, and the more you have to monitor, the more complicated it gets. In this webinar, Steve Hanly, VP of Product at enDAQ, will demonstrate how to quantify vibration signals into a handful of metrics that can be tracked and compared easily. This is very helpful for analysis in long-term maintenance, condition-based monitoring, and predictive and prescriptive maintenance. He'll review: ► Acceleration Peak ► Acceleration RMS ► Crest Factor ► Standard Deviation of Acceleration ► Velocity RMS ► Displacement RMS ► Peak Frequency ► Acceleration RMS below 65 Hz ► Acceleration RMS from 65 to 300 Hz ► Acceleration RMS above 300 Hz ► Peak Pseudo Velocity ► Frequency of Peak Pseudo Velocity We’ve generated a lot of interactive plots for this webinar using Plotly. Follow along with Steve and check out the plots as he explains each metric with the presentation HERE: https://bit.ly/3uGpB49 Check out our corresponding blog posts for more! ► Top 12 Vibration Metrics to Monitor & How to Calculate Them: https://bit.ly/2RL2x5S ► 6 Ways to Measure Vibration: https://bit.ly/3y3j4Tq ► Differences Between Condition-Based, Predictive, and Prescriptive Maintenance: https://bit.ly/3tEVyIG Want to do your own analysis? Try our free enDAQ software and start analyzing today! ►VibrationData Toolbox: https://bit.ly/3hjGs8X ► enDAQ Lab: https://bit.ly/33ywrg7 ► enDAQ Analyzer: https://bit.ly/3ezql5E ► enDAQ Cloud: https://bit.ly/3y20zyC ************************************************* enDAQ WEBSITE: https://bit.ly/3ezqru2 enDAQ BLOG: https://bit.ly/3hn1Wlt enDAQ WEBINARS: https://bit.ly/3y3jBEU ************************************************* #vibrationanalysis #maintenance #enDAQ