Доработанный прицеп с зауженной колеей

We're on Telegram - https://t.me/ProstoPricep Work on the production and retrofitting of a light-duty trailer for motorcycles has been completed. This is a single-axle, dump trailer for light-duty vehicles in Category B, the VEKTOR LAV 81012S, with a narrowed 1740mm wheel beam. The platform dimensions are 3500 x 1800 mm, and the side height is 380 mm. The trailer is equipped with a fiberglass roof with a spring-loaded lifting mechanism. The trailer comes standard with: 7-pin electrical outlet White front daytime running lights Rear headlights with fog lights and license plate light Metal safety cable Tow hitch with closing and wear indicator Tow hitch height adjustment plate Four aluminum load securing rings in the floor Spare tire carrier Jockey wheel R14 wheels with a 4x98 bolt pattern Galvanized square-section wheel beam Single-leaf semi-elliptical spring suspension with hydraulic shock absorbers Quick-release hinges for the front and rear sides Welded frame made of 4mm thick square tubing, hot-dip galvanized Solid sides made of 1.2mm thick cold-rolled galvanized steel, reinforced Stamped rib. The front and rear sides are reinforced with laminated plywood. Floor made of 9mm thick, moisture-resistant, perforated plywood with anti-slip properties. Side and tipper mechanism locking via safety snap hooks with padlock capability. Fiberglass lid with spring-loaded lifting mechanism and four snap hook locks. All trailers arriving from the factory undergo extensive pre-delivery preparation. They are lubricated, tightened, adjusted, and have flash, protruding pins, etc., removed. Additional trailer equipment: -Reinforced white fiberglass CargoBox cover included in the price of the base trailer -Knott hubs and bearings -Tailgate leveling chains -Auxiliary air suspension -Reinforced 18mm floor with two longitudinal, integrated cargo tie-down straps with step-by-step quick-release rings -Reinforced quick-release rings (8 pcs) -LED light A set of 18 sealed trailer lights with dual, round taillights and dynamic turn signals, interior trailer lighting, complete replacement of the factory wiring, and sealed connections to the IP67 standard. -External LED ambient lighting around the trailer perimeter (additional to the "LED Light" option). -European 13-pin plug compatible with the factory towbar socket. -Rearview camera with a separate in-cabin monitor. Functions continuously as a rearview mirror. Can be transferred with the trailer to different vehicles (additional to the "LED Light" option). -Waxing. The trailer's galvanized surface is treated with a transparent synthetic preservative to minimize oxidation and darkening of the zinc, especially during winter operation. -A set of protective heat-shrink caps for all external trailer bolts and nuts (~85 pcs.) -A knott quick-release mechanical winch -A screw-type strut for forced conversion and retention of the trailer in the dump (loading) position. Our contact information: ComTrans Address Russia, St. Petersburg, st. 8 Shturmanskaya St., Floor 3, Office 304. -Main Phone: 8 (812) 334-53-27 -Office work, general inquiries: 8 (964) 360-30-50 Alexandra -Head of Trailer and Commercial Vehicle Upgrades: 8 (964) 360-40-00 Sergey -Light Trailer Sales and Tuning: 8 (964) 360-50-00 Georgy Hours: 9:00 AM to 6:00 PM Mon-Fri Tochka na map: 59.811537,30.312125 https://yandex.ru/navi/?whatshere%5Bz...