Прошивка электросамоката Xiaomi Essential. Для увеличения скорости, бесплатно.

We're flashing the firmware with the M365_downG program, available in the Play Store. Obviously, upgrading the firmware and increasing the speed of the Xiaomi Essential also has its downsides, which we can classify as "negative." First of all, if you take advantage of all the extra power (especially in Sport mode), you'll experience increased battery consumption (obviously proportional to how much you use it). Sports mode - range 13-14 km (original firmware 16-17 km) TIP: Correct tire pressure helps the motor work less and achieve the highest possible speed (and therefore avoid overheating). Correct tire pressure also helps prevent premature punctures due to pinching or friction of the inner tube within the tire itself. Tires shouldn't be inflated by eye; precise pressure is required. A scooter fresh out of the box often has pressure that's half the recommended. Low pressure leads to a "virtual" reduction in tire diameter, reducing the range per wheel revolution and, therefore, the top speed! Download the firmware from the link: https://mp365.es/hacktool/essential/# Do not unzip the archive!!! 1) Original Xiaomi Essential scooter firmware. 2) Xiaomi Essential firmware, v1. KERS (recuperation) disabled, speed range: 20, 25, and 30 km/h. (I ride this one). 3) Xiaomi Essential firmware, v3. The third improved firmware version. It operates at 7/17/22A, KERS (recuperation) enabled, charging mode disabled (compatible with external batteries), speed range: 20, 25, and 30 km/h. 4) Xiaomi Essential firmware, v4. The most powerful and improved firmware version, suitable for those who use external batteries connected in parallel. KERS (recuperation) disabled, compatible with external batteries, starting at 2 km/h, cruise control from 3 seconds. There's a normal mode, which operates at speeds of 5/15/25 km/h, and a turbo mode*, which operates at speeds of 30-35 km/h. *To enable turbo mode, you must turn on the scooter with the brake applied (hold the brake lever and the power button), and it will operate at turbo speed. 5) Xiaomi Essential firmware. This firmware is similar to the one above, but is limited to a speed of 25 km/h in accordance with regulations. It also has charging mode disabled (compatible with external batteries). The only drawback of these firmwares is that while the scooter is charging, the battery percentage is not displayed on the scooter's screen. It is displayed correctly on the phone.