Замена Подшипников Рулевой на Мотоцикле

English version:    • How to Replace Steering Stem Bearings Moto...   Replacing the steering head bearings on a 2012 Yamaha WR450F. The process is similar on most motocross, enduro, and road bikes. We had bad luck with the lower bearing's inner race, which had rusted and seized. We didn't risk knocking the bearing off with a chisel, as recommended in the manual. Cutting through the race seemed the simplest and most accessible option. You can also press the steering axle and race out of the triple clamp with a press. To prevent the bearings from rusting too much, we recommend packing them tightly with grease. 0:00 Steering Bearing Diagnostics 0:30 Specialized Bearing Replacement Tools 0:99 Removing the Fork and Triple Clamps 1:47 Removing the Bearing Outer Races 2:43 Installing New Bearing Outer Races 3:19 Removing the Lower Bearing 5:07 Installing the New Lower Bearing 5:43 Installing the Triple Clamps 6:31 Installing the Fork 6:41 Tightening Torques for the Triple Clamps and Steering Head Nut 7:02 Tightening Torques for the Front Wheel Purchase parts and tools: http://stuntexshop.ru All maintenance videos: https://stuntex.ru/magazine #stuntexshop #stuntex #stuntexclub