Colour Fastness to Water test ISO 105-E01

I explain about this test :--- 1. Specimen size(40 ± 2) mm × (100 ± 2) and Multifiber size (40 ± 2) mm × (100 ± 2) 2. Stitch the specimen with multifiber on face side 3. Specimen Immerse in water for 30 min. 4. Take water 50:1 times (in original weight of the specimen ) 5. Mount the specimen perspiration tester and weight apply (12,5 ± 0,9) kPa With acrylic plate (No. of Acrylic plate11) 6. Heat the loaded specimen in oven at (37 ± 2) °C. for 4 h. 7. Remove the specimen in perspiration tester and drying separate specimen and multifiber for over night after that assessment. Note :--- I am explaining this test I have explained as much as I know if there is any error please comment. you have any question regarding this test plz comment. BELOW LINK PROVIDED FOR TEST Please Subscribe and Share my channel My Email: -- [email protected] ASTM D3512 RTP PILLING TEST    • PILLING TEST ASTM D3512   FABRIC WEIGHT ASTM D3776 Option -C (GSM)    • FABRIC WEIGHT ASTM D3776 Option -C (GSM)   Tensile Strength ASTM D5034    • Tensile Strength ASTM D5034