КАК УСТРАНИТЬ СТУК СЗАДИ НАДОЛГО. ЗАМЕНА ЗАДНИХ АМОРТИЗАТОРОВ ДАСТЕР ТЕРРАНО КАПТУР 4X2 #ВИДЕОЛЕКЦИЯ

Buy MOBILAND shock absorbers and other parts with a 20% DISCOUNT using promo code ZEN20 at https://clck.ru/bmzaA MOBILAND rear shock absorbers for Duster, Kaptur, and Terrano 4x2, part number 134203630 MOBILAND rear shock absorbers for Duster, Kaptur, and Terrano 4x4, part number 134203650 Trunk trim pins (blue) are available for purchase in our store at https://clck.ru/bmZmG Video tutorial on replacing the rear shock absorber on a Renault Duster 4x2. The same procedure is also available for Renault Kaptur 4x2, Arkana 4x2, and Nissan Terrano 4x2. We show how to replace the rear shock absorbers, bump stops, boots, and shock absorber mounts. We'll explain in detail how to disassemble the trunk trim and plastic lining to access the shock absorber, how to properly remove the shock absorber nut and bolt, why the rear shock absorbers are knocking and where the knocking is coming from, how to properly bleed the shock absorber, what to lubricate the mounts with to ensure longer life, and how to properly tighten the rear shock absorbers. We'll also explain how to properly, and most importantly, WHAT spare parts to use for repairs. Tightening torques: Shock absorber strut mounting bolt to rear beam lug: 180 Nm Shock absorber strut upper mount mounting nut to body: 60 Nm Front wheel mounting bolt: 90 Nm Episode contents: 0:00 THE VIDEO WILL CONTAIN 0:29 INTRO 0:36 WHAT THE VIDEO IS ABOUT AND WHO IT IS RELEVANT TO 0:52 TOOLS, CHEMICALS, AND SPARE PARTS FOR REPAIR 1:22 WHERE TO START THE REPAIR 1:44 REMOVE THE UPPER SEAT BELT TRIM 2:39 REMOVE THE TRUNK PILLAR TRIM 2:57 REMOVE THE TRUNK LIGHT 3:23 REMOVE REAR SEAT RETAINER BRACKET 3:40 FOLD BACK THE HINGES AND RELEASE THE TRUNK CARPET 3:44 REMOVE THE PASSENGER C-PILLAR TRIM 4:05 ABOUT THE TRUNK CLIPS 4:33 REMOVE THE TRUNK SIDE TRIM 4:42 REMOVE THE TAIL LIGHT 5:10 THIS ACCESS IS QUITE SUFFICIENT 5:19 WHAT TO DO TO AVOID DISASSEMBLY ALL THE TRUNK TRIM 5:43 LOOSEN BUT DO NOT COMPLETELY UNLOOSEN THE SHOCK ABSORBER MOUNTING NUT 6:39 RIFLE THE CAR AND RIP OFF THE BOLT SHOCK ABSORBER TO BEAM 7:34 LOWER THE CAR AND PLACE A WHEEL STOP 7:53 UNSCREW THE UPPER SHOCK ABSORBER MOUNTING NUT 8:07 COMPLETELY UNSCREW THE SHOCK ABSORBER MOUNTING BOLT TO THE BEAM 8:17 REMOVE THE SHOCK ABSORBER 8:22 WHY THE REAR SHOCK ABSORBER WAS KNOCKING AND WHERE THE SOUND IS COME FROM 8:55 WHICH NEW SHOCK ABSORBERS TO CHOOSE AND WHICH WE INSTALL 10:31 PREPARE ALL SURFACES AND SHOCK ABSORBERS FOR INSTALLATION 11:27 ABOUT BLEEDING NEW SHOCK ABSORBERS 12:29 INSTALL THE NEW SHOCK ABSORBER BY INSERTING IT INTO THE WHEEL ARCH 12:33 THREAD THE LOWER SHOCK ABSORBER BOLT TO THE BEAM 12:59 BY CHECKING THE SHOCK ABSORBER SUPPORT IN THE BODY, THREAD THE UPPER NUT 13:15 LOWER THE CAR COMPLETELY TO ENSURE CORRECT TIGHTENING 13:53 TIGHTEN THE UPPER SHOCK ABSORBER MOUNTING NUT TO THE BODY 14:09 TIGHTEN THE SHOCK ABSORBER BOLT TO THE BEAM 14:18 ABOUT REASSEMBLY OF THE TRIM PANEL AND PISTONS 14:32 HOW DID THE FRONT PERFORM MOBILAND SHOCK ABSORBERS 15:07 FINAL POINT A few USEFUL words about MOBILAND shock absorbers Advantages of MOBILAND shock absorbers: The use of a special disc-type valve system and high-quality shock absorber oil eliminates cavitation, resulting in a smooth ride. The MOBILAND shock absorber working cylinders are manufactured from seamless tubes, increasing the service life of the shock absorbers. The piston rod is made of high-hardness alloy structural steel with a chrome coating for increased wear resistance. The sealing seal is highly resistant to temperature fluctuations, mechanical stress, and oil exposure, ensuring a long service life of the shock absorber. MOBILAND - auto parts for braking systems, suspension, steering, and transmission, as well as consumables. In the development and production of auto parts, we strive to ensure that they are reliable and meet your primary selection criterion: a long service life. So you can remain mobile and focused on your plans. MOBILAND parts are manufactured using Czech technology at the best production facilities in accordance with the quality standards of European automakers. MOBILAND is supported in this by its engineering partner, the Czech company PEER GROUP. Our experience working at the best European factories ensures that MOBILAND parts comply with European quality standards. MOBILAND offers a wide range of auto parts for both European and Asian vehicles. MOBILAND - Czech Auto Parts Reliability Standards #ZENICOM #VIDEO LECTURE #CAR SERVICE #CARREPAIR #SHOCK ABSORBER #STRUTS #VIDEO LECTURE #MOBILAND #SHOCKABSORBER #REMONTDUSTER ------------------------------------------------------------------------------------------------------------------------------------- Lots of interesting stuff here: https://zen.yandex.ru/id/5eb2ab157386... Instagram - daily useful tips on repairs and parts:   / remontrenault