How to Improve the Print Quality of your CTC 3D printer

This is a look at how I improved the quality of the prints from my CTC 3D printer........ If you decide to make these changes to your printer and break it I take no responsibility. This is done at your own risk. The first improvement looked at is the Hot End on the CTC 3D printer. The stock one was swapped out for a 3rd party set and this made a massive improvement. The Second change I made was to add a Glass bed to the CTC 3D printer. This helped remove the bend my original build plate had. ***************IMPORTANT********************* If you are going to use a Glass bed make sure to place a block at the back of your printer to heighten the Z-Stop distance to take into account for the thickness of the glass you just added. Nozzle: http://www.ebay.co.uk/itm/32236704004... Kapton Tape: http://www.ebay.co.uk/itm/11178056659... Glass Bed: http://www.ebay.co.uk/itm/3D-Printer-... Glass bed Z Stop: https://www.thingiverse.com/thing:113... ▼▼▼ Social Media ▼▼▼ Facebook:   / abernus69   Twitter:   / abernus69   Instagram:   / abernus69