Building Evelyn: Resawing and planing lumber for strip planking, EP4
In Episode 4 of Building Evelyn, Louis Sauzedde takes the next two steps in milling lumber for strip planking: 1) Resawing the mahogany boards to roughly 3/4". 2) Planing the mahogany to the finished 5/8" thickness. Once again, Lou shows how to use old or even antique tools to get first rate results. Watch the whole video and learn how to use a short fence for resawing. And see how you can get more from your planer even if it's an old school Delta Milwaukee. Support Evelyn at: / bristolshipwrights Learn more about Evelyn and woodworking techniques at: http://www.bristolshipwrights.com Please follow us at / bristolshipwrights Visit our Facebook page at: / bristolshipwrights
▶︎
Building Evelyn: Picking up and cutting progressive bevels, EP5
▶︎
Common Beginner Mistakes In Hobby Machining
▶︎
Building Evelyn: How to build a curved, raked transom frame, EP7
▶︎
Resawing Lumber on a Bandsaw with Tom McLaughlin
▶︎
Building Evelyn: Hanging a strip plank, EP6
▶︎
Transmit Light - Cutting Guilloche On The Straight-Line Engine #3
▶︎
Building the 23’ V-Bottom Skiff - Episode 21: Side planking
▶︎
Carvel planking - seam splines - part 1
▶︎
Inside the World's Most Advanced Sawmills | How Giant Trees Become Wooden Pallets
▶︎
Making Boards on a Small Wood-Mizer Sawmill: Cutting, Sharpening | Full Process
▶︎
How to install plastic frames for traditional wooden boat building (Part 1 of 2)
▶︎
Building Evelyn: Making the upper transom frame, EP8
▶︎
Strip Planking a Boat? Some Tips You'll Need! S3-E12
▶︎
We Bought an Abandoned Ship 4 Years Ago... This Is What Happened
▶︎
Turning drinking cups – 4 hollowing tools compared
▶︎
Building the 23' V-Bottom Skiff - Episode 11: Bottom planking
▶︎
Building Evelyn: Simple patterns for planks below the tuck, EP16
▶︎
Simplifying scarfs and a unique system for carvel planking: Tools & Tips #3
▶︎
We Relocated the Handwheel on Our MONSTER Lathe | Megabore Lathe Setup
▶︎