Rebuilding A Lyman 45 Lubrisizer Part 4

In this video I am completing the rebuild of a Lyman #45 lubrisizer. This is part 4 which is the final video in this series, where I have reinstalled the lubrisizer in its proper place on the bench, size and lube 22 caliber bullets and breifly describe the 5.7 x 28 cartridge and rifle the bullets are being made for. Our machined lubrisizer bases used in this project can be found here https://hillsgun.com/product/heated-l... Below are some of our affiliate links to products That I use in my reloading room to make the hobby more enjoyable. PID Temperature controller With 40A SSR/Heatsink/ and Thermocouple http://amzn.to/2xOmSMJ PID Temperature controller With 25A SSR and Thermocouple http://amzn.to/2hOi530 Heatsink http://amzn.to/2yxeu2S Lyman 4500 Lube Sizer with Heater 115-Volt http://amzn.to/2zikutP Please bear in mind that these are my opinions and the techniques I have chosen to use in my shop for my projects. You are responsible for your own choices and I take no responsibility for how you might use any information presented here. As a further note if this is a firearms related video and you are working on your personal firearms you may do as you please. if you chose to pursue this as a career and are working on customers firearms you have accepted the liability not only for the work you are performing for that customer, but also for anything which may go wrong in the future which could be even remotely associated with your work. In a society which has come to accept responsibility for nothing as a gunsmith you are now accepting responsibility for everything.!!! ~-~~-~~~-~~-~ Please watch: "Building A Grown Up Quorn Tool & Cutter Grinder: Part 1"    • Building A Grown Up Quorn Tool & Cutter Gr...   ~-~~-~~~-~~-~