Sinotimer ตัดไฟสูง ตัดไฟต่ำ ตัดกระแสเกิน สำหรับการต่อป้องกันเครื่องไฮโวลต์เพียวซายเวฟเสียหาย

In high-voltage systems, sometimes when there's no sunlight, connected appliances experience surges, which can damage the devices. Using a sinotimer with a current limiter will temporarily cut off the power. Once the system returns to normal, it will resume operation. This is another essential device to have on hand. The settings can be set to suit your needs. I've outlined the following guidelines: P01 = 280V (factory setting). A recommended setting is 250V. When the voltage exceeds 250V, the circuit will be cut off. P02 = 250V (factory setting). A recommended setting is 230V. After an overvoltage condition occurs, the circuit will automatically resume after 10 seconds of returning to 230V. P03 = 0.1s (factory setting). P04 = 190V (factory setting). P05 = 200V (factory setting). A recommended setting is 200V after a power outage. When the voltage returns to 200V or within the specified range for 10 seconds (P09=10), the circuit will automatically resume. P06=0.1s (factory setting). Recommended setting: 0.1s. P07=63a (factory setting). Recommended setting: 10a. P08=0.1s is the time allowed for overload conditions to occur: 0.1 seconds. P09=60s (factory setting). Recommended setting: 30 seconds. P10-13: Recommended setting: Factory setting.