Mbengkel #10 : Flushing Coolant Radiator | Ganti Air Radiator | Chevrolet Spin | @Om Andri

Note: The thermostat must be removed to drain all the fluid inside the engine. If you remove even a small hose, there will still be distilled water inside. Hello friends Hope everyone is well. This time, I had the opportunity to visit Uncle Andri's Spin Activ car repair shop. We're going to drain or replace the radiator and replace the radiator tube. The steps and materials are as follows. For more details, please watch the video: Materials and tools: 1. Coolant: Prepare 2 gallons of coolant just in case (Spin coolant capacity is 5.4 liters). 2. Demineralized water (5 liters). 3. 13mm ring spanner (to remove the drain bolt and air bolt). 4. 10mm ring spanner (to remove the radiator ridge bolt). 5. T20 wrench and clip tool (to remove the bolt and fender clip). 6. Pliers and hose clamp tool. 7. Funnel. 8. Empty container and bottle. 9. Radiator tank and cap. The steps in general are: 1. Discard the old coolant. 2. Add the demineralized water and start the engine. 3. Discard the demineralized water. 4. Add the coolant. Intro Song: Chris Lehman - Flash (Vlog No Copyright Music) Music promoted by Vlog No Copyright Music. Video Link:    • Video   outro music by audionautix.comm