DIY 80 mm Electric Ducted Fan | 3D Printed | Thrust test comparison

Hello guys, In this video I have designed and built an 80 mm ducted fan and compared the thrust of three propellers i.e 6 Blade, 8 Blade, and 12 Blade. The ducted fan has an 80 mm diameter and is 3D Printed. I am using a 2500 Kv Racerstar BR2207S motor to rotate the propeller. Check out the video to check the thrust test of the motor and make one for you. Thanks for watching and like, share and subscribe. Discover real DIY builds at https://themechninja.com/ Download files & parts of 80 mm EDF at the below link : https://themechninja.com/product/80mm... Download files & parts of 100 mm EDF at the below link : https://themechninja.com/product/duct... Download files & parts of MINI JET ENGINE at the below link : https://themechninja.com/product/mini... For watching the Racerstar 2500 Kv motor thrust test, visit the link :    • Racerstar 2500KV motor thrust test | 1000 ...   For 100 mm Ducted Fan Video, visit the below link :    • DIY Electric Ducted Fan | 3D Printed | Thr...   🔧 80mm EDF V1.0 – Component List with Buy Links Recommended Electronics • Motor – Racerstar 2500 Kv 🔗 https://themechninja.com/product/race... • Motor – DYS Sunfun 2500 Kv 🔗 https://themechninja.com/product/dys-... • Motor – Samguk 2500 Kv 🔗 https://themechninja.com/product/dys-... • ESC – Hobbywing 40 amp 🔗 https://themechninja.com/product/dys-... • ESC – Readytosky 40 amp 🔗 https://themechninja.com/product/read... • ESC – BLHeli 35A/45A 🔗 https://themechninja.com/product/belh... • Battery – 4S Tattu 14.8V 3300 mAh 60C 🔗 https://themechninja.com/product/4s-3... • Battery – 3S Tattu 11.1V 1300 mAh 75C 🔗 https://themechninja.com/product/3s-l... • Servo Tester 🔗 https://themechninja.com/product/serv... • Battery Charger – Sky RC B6 Neo 🔗 https://themechninja.com/product/sky-... • Battery Charger – Imax B6 🔗 https://themechninja.com/product/i-ma... • Battery Charger – Imax B3 Pro (2S/3S) 🔗 https://themechninja.com/product/imax... • Wattmeter – RC 150A 🔗 https://themechninja.com/product/watt... Necessary Accessories • 3D Printer – 220×220×250 mm build volume • Nuts and Bolts – M2.5, M3 (various lengths) • Accessories – Silicon wires, cable zip tie, heat shrink tube, soldering iron Thank you for watching guys, Don't forget to subscribe