Как дешевле менять втулки стабилизатора на Opel Vectra C! | vce.com.ua #ЗапчастинаOPELVECTRAC

In this video we will tell you about the manufacturers of stabilizer bushings for the Opel Vectra C. We will also tell you which ones to buy and how to save money on their subsequent replacement, which is especially important in today's reality. For questions about purchasing, please contact the sales department on the website https://vce.com.ua/opel/vectra-c-2002... 0:01.1 hello online store vce.com.ua 0:03.3 today we will talk about bushings 0:06.2 front stabilizer opel vectra c 0:09.0 so from the conveyor to the opel vectra c c were installed on 0:14.1 first models of bushings stabilizer 0:16.8 solid which that is, only consisted 0:20.1 from a regular standard bushing 0:23.1 split and tightened with a regular 0:26.2 clamp stabilizer so 0:29.1 after restyling on cars at which 0:32.3 headlights already went braces 0:35.3 bushing stabilizer 0:37.0 was replaced by a silent block which consisted 0:40.5 of two parts upper and lower 0:43.3 parts, then as a rule the diameter 0:48.3 of the front stabilizer on 0:49.6 volume 2.2, 1.8, 1.6 was 24 millimeters on 0:55.9 volumes 2.6, 2.8, 3.2 could be 24 and a half 1:02.7 25 therefore if you have a car with 1:07.8 another volume where 2.2 is desirable 1:10.5 check the diameter stabilizer, then 1:13.8 bushings of the stabilizer which stood on 1:16.5 restalnyh cars 1:17.8 are quite expensive we keep quality 1:24.0 stabilizer bushings original 1:29.2 for example the original bushing this is the upper part 1:32.5 bushings and the lower part of the bushing 1:39.6 the quality of the original you understand will be 1:42.9 an order of magnitude higher than here 1:45.3 licensed manufacturer hans price 1:47.3 and the resource accordingly lower 1:51.7 if you want to switch from a bushing 1:55.4 new model to an old bushing 1:58.5 model the old bushings are usually 2:03.1 an order of magnitude cheaper you will need to 2:05.6 buy a clamp from an old bushing 2:09.1 variants of the stabilizer and the 2:12.7 bushing then in the future 2:16.5 replacement of the bushings will cost it on 2:19.0 an order of magnitude cheaper than such 2:21.0 in terms of service life approximately they 2:22.9 the same service life 2:24.5 but the cost of the old model and the new model 2:27.7 will be an order of magnitude different 2:30.5 at the first replacement if you 2:32.6 install the original bushing and 2:35.7 stabilizer clamp of the old model you have 2:38.4 the cost may approach the replacement 2:41.1 of the new model bushings but in the future 2:44.9 maintenance will be an order of magnitude cheaper also 2:47.8 the manufacturer recommend with plant 2:51.7 treat the inner part 2:54.3 stabilizer bushings with a special paste 2:56.6 which is in the form of Vaseline on 2:59.7 silicone base it provides sliding 3:04.8 between the metal rod 3:06.6 and rubber bushing and stabilization 3:09.9 accordingly your rubber from serves on 3:13.2 order longer therefore in our 3:16.0 store this grease is both in the original 3:19.7 such and not in the original and also used 3:22.1 for guide calipers and if you have 3:24.9 even here grease will remain you 3:27.3 you can then use it not 3:29.2 dries out that is, save and 3:31.1 use other destinations 3:32.7 this particular rubbing pairs plastic 3:36.3 plastic rubber rubber rubber metal and 3:40.7 plastic metal this all backstage and and 3:43.6 various friction points on this 3:49.9 all until next time goodbye   / vce.com.ua     / vce.com.ua   Our phones: (056) 790-23-78 098-169-06-06 093-170-33-54