BSP V5.0 Design and Print Flat Plane Occlusal Splints in Minutes!

Design a custom flat plane occlusal splint from scratch — completely free — using BlueSkyPlan's built-in Occlusal Bite Splint module. In this step-by-step walkthrough, we go from patient setup to print-ready STL in under 12 minutes. Export for a few dollars after confirming design. 🦷 What you'll learn: If you're already scanning in-house, this workflow costs you nothing extra — and gives you full control over splint thickness, occlusal plane angle, ramp geometry, and export quality. --- ⏱️ CHAPTERS 0:00 — Intro: What We're Building & Why 0:45 — Project Setup: Patient File + Arch Selection 1:30 — Workflow Settings: Thickness, Offset, Cusp Radius & Ramp Angle 2:45 — Data Import: Loading Maxilla & Mandible Optical Scans 4:00 — Jaw Articulation: Aligning the Models 5:15 — Splint Curve: Drawing the Boundary on the Arch 6:45 — Remove Undercuts: Cleaning the Model for Print 7:30 — Set Raised Areas: Defining the Flat Occlusal Plane (3.5mm) 9:00 — Edit Splint Morphology: Fine-Tuning the Fit 10:15 — Export: STL Output for Your Printer 11:30 — Recap & Next Steps --- 🆓 BlueSkyPlan is 100% free to download and design. 👉 Get it at: BlueSkyPlan.com --- #OcclusalSplint #BlueSkyPlan #DigitalDentistry #SplintDesign #FlatPlaneSplint #DentalCAD #3DPrintedSplint #BruxismTreatment #TMDTreatment #NightGuard #OcclusalDevice #DentalSoftware #BlueSkyBio #FreeCAD #DentistryTips #RestorativeDentistry #GeneralDentistry #DentalWorkflow #InHouseMilling #DigitalWorkflow