Innovation - Gamme Dart - Grégoire Besson

Hello, I'm Benoit Liboutet in charge of tines developpment by Grégoire Besson I will present you the Carbid dart range. new parts' s collection available for the chisel. This range is the result of 4 years of study, for a complete collection of economic parts , oriented for the agronomy This DART 80 tines is a part obtained by foundry. This allow us no design limit in the shape of the part. We developed the parts only with an agronomic vision. "The attack zone is protected by 3 levels of carbide wafer" "which allow us to achieve optimum wear of the parts" "and thus keep the 80 mm workign width during the whole life of the parts." "Once cracked, the flow of earth will be oriented to the top following 2 guides that form a channel to the deflector. Inside this channel, 2 bosses protect the hexagonal screw heads that secure the tip on the stanchion. The main objective is to have a channel as smooth as possible to limit bonding of the earth, and limit traction and therefore consumption power and fuel The rear also benefits a study of its form. Behind the attack zone, the workpiece is recessed, to avoid talonage and facilitate earthen penetration Above are present 3 bosses 2 whose function is to fix and center the fins and one for securing the baffles In the Dart range, 2 fin widths are available" 254 mm for machines with 230mm of spacing 355 mm for machineswith 306mm of spacing To ensure proper mixing, dual mix deflector throw the flow of soil towards the front of the tines While the universal deflector divide the flow of soil into 2 parts to the side" Of course, all parts are combined.