How to Restore EmuMMC on a Modded Switch (Hekate Guide)

Restore EmuNAND (emuMMC) on a Modded Nintendo Switch In this video I’ll show you how to restore your emuMMC (emuNAND) from a previously created backup using Hekate. This guide can help you recover your custom firmware setup if something has gone wrong, or restore your console back to a previous working state. If you followed my earlier guides and created a backup of your emuNAND, this process allows you to bring everything back exactly as it was. What This Guide Covers • Formatting your SD card correctly • Preparing your backup files for restoration • Creating the correct partition in Hekate • Restoring emuMMC BOOT0 & BOOT1 • Restoring the RAW GPP emuNAND partition • Booting back into your custom firmware When You Might Need This This guide is useful if: • Your modded Switch has stopped booting properly • Your emuNAND became corrupted • You want to restore a previous setup • You're fixing a system issue Important Notes ⚠️ Your emuMMC partition size must match the size used when the backup was created or the restore will fail. ⚠️ This guide assumes you have already created an emuNAND backup. Chapters 00:00 Intro + disclaimer 00:46 Formatting the SD card 01:17 Bootloader & payload setup 01:34 Preparing restore file paths 02:20 Partitioning the SD card in Hekate 03:25 Moving backup files to SD card 03:44 Restoring BOOT0 & BOOT1 04:08 Restoring RAW GPP emuNAND 04:42 Booting back into custom firmware Related Guides How to Backup EmuNAND    • Backup Your EmuMMC (EmuNAND) on a Modded S...   Complete Modded Switch Setup Guide    • How to create your SD Card with Atmosphere...   1UPTechy Sd card pack: https://drive.google.com/file/d/1g6sX... Rufus (SD management program) https://rufus.ie/en/#download If this guide helped you: 👍 Like the video 🔔 Subscribe for more modded Switch tutorials 💬 Comment if you ran into issues — I’ll try to help Thanks for watching. 1UPTechy 🎮 If you want, I can also give you 4-word thumbnail text for this video that will get clicks, because restore videos tend to perform very well if the thumbnail is right. can you create one for the backup emunand we did as well please Here’s a matching title + description for the emuNAND backup video, keeping it consistent with your other guides so the series looks organised. 🎬 Title How to Backup EmuNAND on a Modded Nintendo Switch | Protect Your Setup Alternative (very searchable): Backup EmuMMC on a Modded Switch (Hekate Guide) 📄 YouTube Description How to Backup EmuNAND (emuMMC) on a Modded Nintendo Switch In this video I’ll show you how to create a full backup of your emuMMC (emuNAND) using Hekate. Backing up your emuNAND is one of the most important things you can do on a modded Switch. It allows you to restore your console if something goes wrong or migrate your setup to a larger SD card without starting again. Think of this as a save point for your custom firmware setup. What This Guide Covers • Booting into Hekate • Backing up emuMMC BOOT0 & BOOT1 • Backing up the RAW GPP emuNAND partition • Moving the backup safely to your PC • Storing your backup correctly Why This Is Important Backing up your emuNAND allows you to: • Restore your system if something breaks • Upgrade your SD card without losing your setup • Recover from software issues • Protect hours of setup work Important Notes ⚠️ Your backup files can be very large depending on your console: • V1 / V2 / Lite – around 30GB • OLED – around 60GB Make sure you have enough storage space on your PC or external drive. Chapters 00:00 Intro + disclaimer 00:35 Boot into Hekate 01:10 Backup emuMMC BOOT0 & BOOT1 01:50 Backup RAW GPP partition 03:00 Moving backup files to PC 04:00 Storing your backup safely Related Guides Restore EmuNAND Guide [Add Link] Upgrade SD Card Without Losing Setup [Add Link] Complete Modded Switch Setup Guide [Add Link] If this guide helped you: 👍 Like the video 🔔 Subscribe for more modded Switch tutorials 💬 Comment if you ran into issues Thanks for watching. 1UPTechy 🎮