94 % des gens n’utilise pas correctement le ruban téflon !

Are you making a PTFE seal but it still leaks? 😬 You’re not alone… and there’s a strong chance you’re making a common mistake with PTFE tape without realising it. In this video, I show you the mistakes to avoid when using PTFE tape, how to make a perfectly watertight PTFE seal, and why your fitting leaks even when using PTFE tape. 👉 Whether you’re a beginner or an experienced DIY enthusiast, understanding how to use PTFE tape in plumbing will save you time, prevent leaks, and protect your installation. 🔥 What you’ll learn in this video ✔️ How to make a PTFE seal correctly ✔️ How many wraps of PTFE tape to use ✔️ Which direction to wrap PTFE tape (very common mistake) ✔️ Common PTFE mistakes that cause leaks ✔️ How to get a watertight fitting on the first attempt ⚠️ Why does your PTFE seal leak? A bad PTFE seal can cause: • water leaks • pressure loss • damage to your installation 👉 Often, the issue comes from a simple detail… that nobody explains. 🛠️ Pro tip A good PTFE seal isn’t just about adding tape… It’s about the right direction, the right tension, and the right amount. And that changes everything. ⏱️ CHAPTERS 00:00 : Why your PTFE leaks (mistakes to avoid) 00:32 : Mistake #1: wrong PTFE direction 01:38 : How to apply PTFE properly (direction + perfect tension) 03:03 : Mistake #2: dirty threads = guaranteed leak 05:03 : Mistake #3: wrong number of wraps 06:08 : Mistake #4: incorrect PTFE positioning 07:33 : Mistake #5: PTFE in the wrong place 10:17 : Mistake #6: incorrect use of PTFE 🚀 Don’t forget to subscribe If you want more DIY tips, plumbing tips, and practical everyday advice, subscribe now 🔔 For contact: [email protected] #teflon #ptfetape #plumbing #DIY #plumbingtips #waterleak #pipefittings #homeimprovement #easyDIY #homehacks