Полировка фар: рассказываем как, чем и зачем!

We've selected a combination of materials for manual and automatic headlight grinding and polishing especially for you. ⠀ • For manual grinding, we recommend Mirka/Hanko abrasive sheets with grit P1000-2500, depending on the depth of the damage. ⠀ • When using a sander, Mirka Microstar/Abralon grinding wheels are useful, followed by Hanko Sponge Pyramid TZ 700 finishing abrasive (a very good alternative to 3M Trizact). ⠀ • During the polishing stage, the most important component is, of course, the polishing paste. Universal pastes and specialized products for polycarbonate have proven themselves to be very effective. ⠀ • Menzerna Power Protect Ultra 2-in-1 universal polishing compound is used to remove micro-fine scratches and holograms, as well as to protect the surface. It provides an excellent level of gloss and has ideal water-repellent properties. Silicone-free. ⠀ • Menzerna HCC 400 coarse-grain polishing paste is convenient for correcting medium scratches, quickly removing sanding marks from P1200 grit, and imparting a superior shine to the finish in one step. It leaves no streaks and is silicone-free. ⠀ • Fine-grain and coarse-grain pastes from the Rupes Big Foot line remove light and deep defects, providing high-quality reflections with a high gloss. ⠀ • Hanko P-Cutting, a special paste for polycarbonate, effectively removes light oxidation and scratches, ensuring transparency and shine of the treated surface. ⠀ • After all procedures, it is recommended to use Hanko P-Protect polycarbonate protective compound, which creates a very thin film on the headlight surface and protects against UV rays, atmospheric factors, and contaminants. A link to the full article about headlight polishing is available on our website: https://avtorefinisher.ru/polirovka-f...