The SHOCKING Truth Inside Your Rifle Barrel (Good vs. Bad Scope)

Showing a rifle barrel machined with a good chamber and throat and one that is not. Essential Barrel Scoping Tips for a Better Shooting Rifle. Is your rifle barrel sabotaging your accuracy? We pull out the bore scope to show you the SHOCKING difference between a truly good barrel and one that struggles with group sizes, right down to the throat and rifling. In this deep dive, we put a Remington 700 (.308) that was giving us 1.25" - 1.5" groups under the scope. The results confirmed our suspicions about the rifle's inconsistency: we found major quality control flaws, including dramatically inconsistent rifling engagement in the throat—a clear example of a chamber bored off-center. We then provide a direct comparison by showing you the pristine, uniform rifling and throat of a good 6.5 Creedmoor barrel. If you're chasing precision, this video is essential viewing to understand how your barrel’s quality directly affects your accuracy. Watch to see why the Remington barrel is officially done and what our re-barrel dilemma is next! Key Moments & Timestamps: 00:00 - Intro & The "Bad" Remington 700 (.308) Barrel 00:58 - Bore Scope Analysis: Inconsistent Rifling & Off-Center Chamber 02:40 - Why This Barrel Never Shot Well (The Root Cause) 03:53 - Re-barrel Dilemma: Stick with .308 or Rechamber? 04:47 - What a "Good" 6.5 Creedmoor Barrel Throat Looks Like Keywords (for Searchability): Bore scope, rifle barrel, Remington 700, 308, 6.5 Creedmoor, rifle accuracy, inconsistent rifling, chamber throat, precision shooting, gunsmithing, cold hammer forged, quality control. Connect with CW Guns & Gear! Subscribe for more videos:    / @cwgunsandgear   Check out our Merch Store: https://cw-guns-and-gear.printify.me #RifleAccuracy #BoreScope #Gunsmithing #Remington700 #PrecisionShooting