존테스 368G 블랙에서 화이트로 모든 외장 커버 조립하는 방법 How To Assemble All The Outer Covers ZONTES 368G [기초팁 55탄]

Here's how to reassemble the disassembled exterior cover of the Zontes 368G. * Detailed instructions and instructions for assembling the cover are provided. * This video was created at the request of subscribers for Chuseok, the 25th anniversary of the event. * 1. At the request of subscribers, I reassembled the Zontes 368G cover during Chuseok. (I wanted to show the disassembly process, but due to the production limitations, I'm only posting the assembly instructions.) 2. The cover is painted in Mercedes-Benz E-Class white, and all the gold-plated parts are genuine. 3. The Zontes 368G provides ample power at 12 volts and 12 amps. (If you use a lot of electrical devices, you should definitely install a relay.) 4. Here's a brief explanation of the internal components of the Zontes 368G, the most powerful quarter scooter available. 5. All Zontes products have two fuse boxes. Be sure to check. (If the fuse in the PKE fuse box blows, the power will not turn on.) 6. Install the seat damper in the luggage box downward to accommodate a full-face helmet. 7. Start assembling the completely disassembled scooter by removing the footrest and footrest side. (The auxiliary coolant tank is installed in front of the right footrest.) 8. Assemble the left and right body covers and assemble the rear handle. 9. Assemble the left and right middle covers. 10. Assemble the left and right inner box covers. 11. Assemble the muffler cover and assemble the muffler guard together. 12. The metal garnish is difficult to work with. There are three hex screws inside. 13. Assemble the lower cover of the fuel tank cap, then assemble the left and right upper middle covers. 14. Assemble the left and right fuel tank triangular covers. 15. Assemble the left and right front covers (including the turn signal). 16. Assemble the inner box upper cover. 17. Assemble the front fender. Check the brake hose bracket location. 18. Assemble the luggage box. There are two wires, so check and connect them. 19. Assemble the seat and securely attach the rubber cap. 20. Assemble the light under cover and attach the cap. (You must be able to disassemble the light under cover to disassemble the front cover.) 21. Assemble the left and right footrests and attach the fog lights. 22. Assemble the light cover and you're done. Most bolts and screws on the Zontes are hex or torx. Always use good tools when disassembling and assembling to avoid problems.* Scooter: ZONTES 368G - Engine: Liquid-cooled single-cylinder 367.6CC, Bosch ECU Power: 38.8PS Tank: 17.5L Brake: 2-channel ABS, TCS Color: Korea Black, Gray Price: 7.98 million won for 25 years #ZONTES38G#368GAllCoverReplacement#ZONTESAssemblyHowTo#ZONTESParts