The ultimate guide to Flagstone Patio building!

Here is our process when it comes to installing a flagstone patio. Step 1: Determine height, size and shape of desired patio. Step 2: Mark out area approximately 1 foot larger than desired patio. Step 3: Remove grass and soil as needed to reach height of subgrade. Step 4: Install geotextile fabric as needed. Step 5: Install sub-base gravel is applicable. Step 6: Install base gravel. Step 7: Install bedding gravel. Step 8: Install flagstone, starting with largest pieces. Step 9: Fit smaller flagstone in between stones, cut and trim as necessary. Step 10: Clean patio and install joint sand or other material. Step 11: Clean the work area, pat yourself on the back take a picture. Step 12: Grab some family and friend to enjoy your new flagstone patio. 0:00 Introduction to Flagstone Patio 0:28 The Subgrade 3:10 Stone Subbase Layer 4:14 Geotextile Fabric 6:45 Compacting 7:01 Stone Base Layer 10:05 Stone Bedding Layer 12:24 Laying Flagstone 19:08 Sand 19:39 Tapping 19:57 Blow Clean and Wet Down 20:22 Review and Conclusion Learn more about our Nara Stone System here: https://www.sierralandscapemanagement...