Enable and Verify RESTCONF with the CLI and Postman.

Join Keith as he demonstrates enabling and verifying RESTCONF from the CLI and Postman. Previous 8 Minute Video 👉    • What is a REST-based API❓ (and why you nee...   CURL or even better Postman. Router config: conf t username admin priv 15 secret Cisco!23 ip http secure-server ip http authentication local restconf int gig 1 ip add 192.168.1.56 255.255.255.0 no shut router ospf 1 network 0.0.0.0 255.255.255.255 area 0 ip route 0.0.0.0 0.0.0.0 192.168.1.1 router eigrp 1 net 0.0.0.0 end debug ip http ssl error remember authentication/authorization -user "admin:Cisco!23" remember header: Content-Type:application/yang-data+json See the video for the details. GET: https://192.168.1.56/restconf/ https://192.168.1.56/restconf/data/netconf-state/capabilities https://{{host}}/restconf/data/netconf-state/capabilities https://192.168.1.56/restconf/data/Cisco-IOS-XE-native:native/ https://192.168.1.56/restconf/data/Cisco-IOS-XE-native:native/router/ https://192.168.1.56/restconf/data/Cisco-IOS-XE-native:native/router/router-ospf https://192.168.1.56/restconf/data/Cisco-IOS-XE-native:native/interface/ https://192.168.1.56/restconf/data/Cisco-IOS-XE-native:native/interface/ https://192.168.1.56/restconf/data/ietf-interfaces:interfaces https://192.168.1.56/restconf/data/Cisco-IOS-XE-interfaces-oper:interfaces https://192.168.1.56/restconf/data/Cisco-IOS-XE-interfaces-oper:interfaces/interface=GigabitEthernet1 https://192.168.1.56/restconf/data/Cisco-IOS-XE-interfaces-oper:interfaces/interface=Loopback0 POST: https://192.168.1.56/restconf/data/ietf-interfaces:interfaces Body: { "ietf-interfaces:interface": { "name": "Loopback99", "type": "iana-if-type:softwareLoopback", "enabled": true, "ietf-ip:ipv4": { "address": [ { "ip": "99.99.99.99", "netmask": "255.255.255.255" } ] } } } Enjoy, Like, and Subscribe. 😃 Free YouTube Playlists from Keith: ▶ Master Playlist for Cisco CCNA 200-301 https://ogit.online/sloth 🔐 Cisco CCNA 200-301 Security https://ogit.online/200-301_Security 💻 Cisco CCNA 200-301 IPv4 Subnetting https://ogit.online/subnet 💬 Join our Discord server (free) https://ogit.online/Join_OGIT_on_Discord 🏪 Keith Barker Amazon Affiliate Store https://www.amazon.com/shop/keithbarker And… 🏫 Keith’s Content at CBT Nuggets https://ogit.online/Keith-CBT #KeithBarker #CCNA #200-301