1000mm/s: THE COMPLEX PRINT on 247zero a fast Voron 0

Please open this video description to learn more about this printer. I started with a V0.0 Kit from Aliexpress (now it's 0.1, which is better in any respect)*: Formbot Voron V0.1 Kit (AliExpress) https://bit.ly/39kfWdC LDO Voron V0.1 KIT (Caribou3D) https://bit.ly/3KBxqzL Recommended Kits for bigger DIY printers: Voron 2.4 Kit (AliExpress) kit bit.ly/3PklmWE Voron Trident Kit (AliExpress) https://bit.ly/3yxMaNe STL files, instructions and BOM: https://247printing.gumroad.com/l/247... Links @247printing: Patreon:   / 247printing   Instagram:   / 247printing   Twitter:   / 247_printing   Discord (under construction):   / discord   Homepage with loads of info: incoming! This is the fast and ultra high speed 3d print you voted for to be next on the channel and I added some updates to the printer meanwhile, which were in the CAD pipeline :) Lot's of comments in the last videos were asking for a detailed model to be 3D printed ultra fast at 1000mm/s (as always: peak!) - I was confident to do it on this capable Voron 0 (V0 / Zero) including the awesome Klipper firmware and some hardware/software tweaking. I chose the model of a Raspberry Pi holder for the Voron 0.0: Lots of small details and 90° edges. Little overhangs. The aim is not perfect quality, but 100% function printed ultra fast. Many are asking for the release of my designs: Please stay tuned, I'll do it properly with well tested parts and proper guides how to upgrade. On YouTube and soon on our incoming homepage! Table of content: -------------------------------------------------- 1. Products used 2. Print settings used 3. My modest video gear 1. Details on the upgrades/products - some affiliate links to keep the high expenses a bit lower: --------------------------------------------------------------------------------------------------------------------------------------- All information about Voron (designer of the base printer V0): https://www.vorondesign.com/ For years now, I use BigTreeTech/BIQU products - very much recommended: (I was sponsored with an Octopus Board V1.1, TMC2209, 70W Heater and PT1000 thermistor) Get the Octopus Board here: https://bit.ly/31kKCrj Hotend: Genuine Slice Engineering Mosquito Magnum: At Slice Engineering (5% off with this link): https://www.sliceengineering.com/247p... At 3DJake: https://tidd.ly/3jgkcx4 Heater block - awesome Volcomosq by Nitram, watch his video (order info in the description):    • How did I end up with the VolcoMosq?   Motors: OMC 14HS20-1504S @1.7A - Voron 0.1 specified: https://www.omc-stepperonline.com/nem... For stiffness and weight reduction I re-designed the X-gantry to be printed with the truly awesome PET CARBON FIBER by AzureFilm3D (prints very easy and is superior to ABS in every respect): https://tidd.ly/3pc8Xtn I bought a LDO Motors linear rail kit from Lecktor: https://lecktor.com/en/v0-motion/751-... Lubrication of the rails is done with WD40 specialist PTFE (lower friction): https://amzn.to/2ZTE2rc I use an E3D Hemera at bowden configuration: https://amzn.to/2ZOTnZX Bowden adapter: https://amzn.to/3Ffo76I Fans for external static cooling (sold out...): https://www.mouser.de/ProductDetail/D... Alternative 4028 fans, which are available, but not as crazy powerful (but surely sufficient): https://s.click.aliexpress.com/e/_97e6Rl 2. Print settings in this preview video: ------------------------------------------------------------------------------------------------------------ Printed on ESUN ABS+ (silver) Slicer: Idea Maker Nozzle: 0.4mm Layer Height: 0.1mm Line width: 0.4mm Max Volumetric flow: 40mm³/s Firmware: Klipper on Mainsail Requested speed: 1000mm/s (all features) / first layer: 200mm/s Commanded acceleration: 30000mm/s² Square corner velocity: 20mm/s T_Bed: 105°C T_Hotend: 305°C Cooling speed: 20%-60% (on certain layers only) 3. My modest video gear ------------------------------------------------------- iPhone 11 Pro: https://amzn.to/2VZYswJ Smartphone video rig: https://amzn.to/3iriub5 GoPro Hero 9: https://amzn.to/2UZI9Q5 FLIR ONE PRO: https://amzn.to/2UWAe67 Similar to the soft boxes I use: https://amzn.to/3xRes2d Similar to the tripod I use: https://amzn.to/2V1I6mw #247printing #JoinTheSpeed #volcomosq #3Dprinting #VzSpeedCube #SpeedBoatRace