How to Replace Rear Coil Spring 2005-2010 Chrysler 300

Shop for New Auto Parts at 1AAuto.com https://1aau.to/c/209/m/coil-springs This video shows you how to install new coil springs in your 2005-2010 Chrysler 300. Worn coil springs cause a bouncy, unstable, and unsafe ride. If the ride in your vehicle feels like a trampoline, it's time for new springs! This repair was done on a 2005 Chrysler 300 C 5.7L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles: 2005 Chrysler 300 2006 Chrysler 300 2007 Chrysler 300 2008 Chrysler 300 2009 Chrysler 300 2010 Chrysler 300 Tools you will need: • Pry Bar https://trq.video/oKK-1AXAA00020 • 15mm Wrench • 18mm Socket • 21mm Socket • Pliers • Ratchet • Socket Extensions • Torque Wrench https://trq.video/oaqy-1AXAA00044 • Hammer • Pole Jack • Rubber Mallet Subscribe:    / @trq   Check out our playlist: Chrysler 300 1st Generation 2005-2010:    • Chrysler 300 1st Generation 2005-2010   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Note: As an Amazon Associate we earn from qualifying purchases.