РЕМОНТ ПЕРЕДНЕГО СУППОРТА НА РЕНО КАПТУР, АРКАНА, ДАСТЕР, ТЕРРАНО. ЗАМЕНА ТОРМОЗНОГО ПОРШНЯ И МАНЖЕТ

#CALIPER #CALIPERREPAIR #PADREPLACEMENT #BRAKEPADS Parts used in the video can be found at the following links: Front caliper repair kit for Renault Kaptur 2.0, Duster 2.0, Arkana, Fluence, Megane 3, Nissan Terrano 2.0 Front brake pads for Renault Kaptur 2.0, Duster 2.0, Arkana, Fluence, Megane 3, Nissan Terrano 2.0 Detailed video tutorial on replacing the front caliper repair kit (brake piston, brake piston boot, piston boot, bleeder nipple). Our patient is a 2017 Renault Kaptur 2.0 4x4 automatic transmission, but the replacement is similar for the Renault Kaptur 2.0, Duster 2.0, Arkana, Fluence, Megane 3, and Nissan Terrano 2.0. In this video, we'll show you how to remove the brake caliper, replace the front pads, remove the brake hose, disassemble the brake caliper and all its components, install a new brake piston, boot, and dust boot yourself, install the brake caliper spring, eliminate squealing and sticking brakes, and bleed (bleed) air from the brake hose. Brake system tightening torques: Front brake hose connection to the brake cylinder: 17 Nm Brake hose connections to the brake pipes and brake system components: 14 Nm Brake pipe connections to each other: 6 Nm Brake hose fittings: 14 Nm ABS speed sensor mounting bolt: 6 Nm Brake shoe guide bolt: 105 Nm Front brake disc protective cover mounting bolt: 7 Nm Rear drum brake slave cylinder mounting bolts: 14 Nm Master cylinder mounting nuts to the vacuum booster: 21 Nm Vacuum booster mounting nuts: 21 Nm Brake disc mounting bolt: 14 Nm Brake caliper guide pins: 34 Nm Parking brake lever mounting bolt: 21 Nm Rear brake shield mounting bolt 105 Nm Video Contents: 0:00 THIS VIDEO WILL CONTAIN 0:39 WHAT IS THE VIDEO ABOUT 1:08 BEFORE YOU START 1:15 REMOVE THE WHEEL 1:23 WHY WE CHANGE THE REPAIR KIT 1:41 REMOVE THE CALIPER SPRING 2:03 REMOVE THE BLEEDER NUT AND HOSE 2:42 REMOVE THE PADS AND FOLD THE CALIPER 3:00 DISENGAGE THE BRAKE HOSE 3:34 UNSCREW THE CALIPER BOLTS 4:45 REMOVE THE CALIPER 6:05 REMOVE ALL CALIPER PARTS AND CLEAN THEM 9:15 ASSEMBLE THE CALIPER NEW PARTS 4:29 PM INSTALLING THE CALIPER 5:30 PM ABOUT PADS 8:15 PM BLEEDING THE BRAKE SYSTEM 9:21 PM FINAL POINT ------------------------------------------------------------------------------------------------------ Instagram - daily useful tips on repairs and spare parts:   / remontrenault   Join the Renault Repair team:    / @zenicom   Decoding the VIN and equipment of your Renault: http://www.donationalerts.ru/r/petrth...