Shimano EP801/EP600 Speed Unlock with Eplus Flash (ENG)
Eplus Flash customizes the factory parameters of the Shimano EP801/EP600 motor (speed at 35 or 60 km/h) without the need to install hardware in the motor. The speed and all data will be calculated and displayed correctly on the display. ATTENTION: Compatible with version 4.2.0 To proceed with the unlocking, it is necessary to disconnect every connected device from the motor, including the battery, both during the unlocking and during the restoration of the original firmware; Failure to comply with this point could lead to problems starting the bike. After having carried out one of the modifications (Original, 35 km/h or 60 km/h) on the EP801/EP600 engine, you must follow this further procedure: Disconnect the "EW-SD300" cable from the motor terminal block Reconnect all cables as originally Connect the "EW-SD300" cable to a free terminal on the motor terminal board Open the Shimano E-Tube 5 software Connect to the e-bike by pressing "NEXT" Ignore any messages Once connected, press the "UNCONNECT" button Disconnect the "EW-SD300" cable from the motor terminal block Turn on the e-bike Website: https://www.eplus.bike/en/prodotto/sh... Facebook: / ebike.tuning.specialists Instagram: / eplus_bike Sign up to stay updated! / @eplustuningspecialists Timestamp: 0:00 Intro 0:04 Preliminary phase 0:26 Connection of the engine to the PC 0:47 Speed Unlock 1:43 Final phase 2:00 Outro ATTENTION Unlocking the speed limiter in public places such as streets, squares, cycle paths is prohibited by law. Therefore it is possible to activate the unlocking in limited places such as circuits, tracks and private properties. The manufacturer declines any responsibility for any damage caused to pedal-assisted bicycles on which the Eplus system is mounted. The manufacturer declines all responsibility for damage to people or things caused by or in any way related to the use of Eplus. Modifications to the engine could alter the operation of the ebike; consequently, the engine may react differently when compared to the standard conditions indicated by the manufacturer. Maximum caution and the use of a helmet are required when riding an ebike that has been modified. ALL TRADEMARKS MENTIONED ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. BOSCH, YAMAHA, BROSE, SPECIALIZED, FAZUA, SHIMANO, E-TUBE, GIANT, ROCKY MOUNTAIN, OLI NON SUPPORTANO, NON SPONSORIZZANO, NON SONO IN ALCUN MODO DA RITENERSI LEGATI ALLA NOSTRA AZIENDA.

Tuning de-restricting a Bosch Gen 4 eBike VOLspeed chip

RedPed 2s for Shimano EP8 - Installation - DU-EP800 - E-Bike Tuning

Vintage Magnolia Art Collection #2 | 4K TV Frame Art Screensaver | Vintage Moody Inspired Floral Art

SHIMANO Motor Extender Installation Guide

Hack your EMTB for unlimited speed

Shimano SM PCE02 - do we need it?

Part 2 of 2 Shimano EP8: How I Raised My eMTB Speed Limit from 15 mph to 20 mph (Step-by-Step)

VisionXRig Land Kit – Complete Setup & User Guide for MTB & Motorcycle

God Says:"AN URGENT CALL — OPEN QUICKLY TO HEAR WHAT I HAVE TO SAY."/God Message Now/God Message

SHIMANO EP6 or EP8 Ebike — Which Is Better? People Are Wrong!

Pastel Pink Coquette Ribbons Aesthetic Background Wallpaper Screensaver | Coquette bow Frame TV art

Is the Shimano EP801 Actually Bad? Full Breakdown

Shimano EP801 Race Update - How Much More Power?

Unlocking your Shimano motor on an electric mountain bike for less than €35 (STEPS EP8, E8000, E7...

Night Light Pink Screen 3 Hours No Ads #ledlights #colors #pink #chromakey #mood #nosound #led #asmr

Part 1 of 2 Shimano EP8 Unlock – How to Upgrade AliExpress EU Motor to 20 mph (Step-by-Step Setup)

The eBike Motor Reliability Crisis — Here Are 3 Motors You Can Trust

E-bike tuning - Tuning chip function and installation compatible with Shimano E8000, E7000, E6002...

Shimano STEPS EP801 eBike 🚴 Anschlüsse & Stecker 🔌 Licht & Zubehör nachrüsten 💡 Abdeckung entfernen

