DIY Camera Dolly Track

I wanted to add greater stability to the motion shots in my videos and began looking at various DIY slider and track designs for the camera dolly I recently purchased. I decided to use aluminium angle as opposed to PVC because I wanted my slider to be at least 72 inches for the shots I wanted to do and I really didn't feel comfortable that PVC would remain ridgid or stable for that length. There were two ways I could have laid out the aluminium angle; in a L-shape configuration or a V-shape configuration. I did a test with the L-shape configuration and discovered that unless I had the wheels of he dolly lined up perfectly the axles rubbed against the vertical side causing noise and vibration which was unacceptable. So, I went with the V-shape configuration and I am very pleased with the result. This keeps the dolly going in the proper direction even if the wheels are not quite lined up correctly and is virtually silent. It is light weight, ridgid and can be easily disassembled for storage or shipment with simple hand tools. It is important to note that weather you use an L-shape or V-shape configuration for your track you need to ensure that the wheels on your dolly are aligned and locked tightly into position to run straight and thoroughly test on the track before mounting your camera on the dolley. Aluminum angle comes in several pre-cut lengths. So, if you only need a 36" track that size is readly available and less expensive. In order to identify how far apart the aluminium angles for your dolly need to be simply measure the distance between the edge of the wheels and add 1 inch to either end of the flat stock to get the correct length. So, if the center line of your wheels are 5 inches apart you will need a cross member that is 7 inches long and center up your holes. You can also add a threaded hole in the middle so that you can mount it on your tripod. If you liked this video please press like and share with your friends. If you are not already a subscriber, I would love to have you as a subscriber. Thanks for watching and, as always, good luck on your projects. Parts List: 2 - 1/8"x2"x2"x72" aluminium angle 1 - 1/8"x2"x24" aluminum flat stock 4 - 1/4"x2&1/4" screws & nuts 8 - 1/4" washers 4 - 1/4" lock washers Tools List: 1 - drill 1 - 1/4" drill bit 1 - screw driver 1 - wrench or pliers 1 - hack saw with metal blade Video Gear & Editing Software Used For This Video : ** Camera Canon VIXIA HF R80 http://amzn.to/2iDbQPN (I actually use an older model which Canon no longer produces) ** Microphone Audio-Technica AT2005USB Cardioid Dynamic USB/XLR Microphone https://amzn.to/2Gh2RCR ** Microphone External Lavalier Microphone with 20' audio cable + Accessory Bundle for Canon VIXIA http://amzn.to/2hO8yK8 ** Lighting Linco Lincostore Photography Equipment Photo Studio Lighting http://amzn.to/2ycZvsc ** Tripod I3ePro Professional 72-inch Tripod 3-way Panhead Tilt Motion with Built In Bubble Leveling http://amzn.to/2yDoHwn ** Editing Software Corel VideoStudio Ultimate X10 http://amzn.to/2zDutOI DISCLAIMER: We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.