Inspecting Your Outlander or Renegade According to the Factory Maintenance Schedule

Today I'm going to give a very brief walk through on how to inspect and maintain critical areas of your Outlander or Renegade ATV according to the Can Am factory maintenance schedule. This is a quick and easy, and often overlooked step that makes a huge difference in not only maintaining your ATV, but also its performance. The factory maintenance schedule calls for this to be done at every 1,000 miles or 50 hours, or if riding in severe conditions 500 miles or 25 hours, whichever comes first. Regardless of the distance or amount of hours of operation, these areas should be inspected on a case by case basis depending on how you ride ensuring your ATV will be in top shape for years to come. Follow us on Instagram:   / socal_outlander_atv   0:00 Introduction 0:50 Inspect & Clean CVT Air Filter 1:13 Verify Battery Connections 1:32 Inspect Drive Shaft Boots & Protectors 1:43 Inspect Tie Rods, Ball Joints, & Boots 2:31 Inspect Front & Rear Brake Pads 3:01 Inspect Wheel Bearings 3:46 Outro