Hyundai i30N Hatch PD (2018-2020) - Flow Designs Full Splitter Kit Install

Freshly installed Flow Designs Splitter Kit for this i30N Hatch PD (2018-2020) giving it a whole new look. 0:00 - Intro 0:29 - Side Splitter Install 0:58 - SIDE | Step 01 - Jack Car Up 1:07 - SIDE | Step 02 - Align Supplied Template under side skirt 1:25 - SIDE | Step 03 - Pre-Drill Template hole 1:34 - SIDE | Step 04 - Drill holes with 11mm Drill bit 1:43 - SIDE | Step 05 - Insert 1st Jack Nut 1:53 - SIDE | Step 06 - Use Jack Nut tool to tighten nut 2:44 - SIDE | Step 07 - Place Side Skirt in place + Install Jack Nut 3:09 - SIDE | Step 08 - Pre-Drill remaining holes - 8mm Drill 3:28 - SIDE | Step 09 - Remove first installed bolt 3:42 - SIDE | Step 10 - Use 10mm Drill and Widen holes 3:53 - SIDE | Step 11 - Install remaining Jack Nut 4:02 - SIDE | Step 12 - Fasten Remaining Jack Nuts 4:25 - SIDE | Step 13 - Bolt Side Splitter in place 5:24 - SIDE EXTRA | Step 15 - Bolt in additional Winglets 5:55 - Rear Splitter Side Install 6:10 - REAR SIDE | Step 01 - Remove Rear Guard Cover 6:33 - REAR SIDE | Step 02 - Line up Spat and Mark Holes 6:58 - REAR SIDE | Step 03 - Drill Holes with 8mm Drill Bit 7:10 - REAR SIDE | Step 04 - Setup Nut & Bolt Combo for installing 7:30 - REAR SIDE EXTRA | Step 05 - Install Additional Winglets 7:55 - Rear Flow Lock Diffuser Install 8:16 - REAR DIFFUSER | Step 01 - Install Fins onto Diffuser 8:48 - REAR DIFFUSER | Step 02 - Align + Mark holes on Diffuser 9:22 - REAR DIFFUSER | Step 03 - Install + Tighten Bolts 9:31 - Front Splitter Install 9:36 - FRONT | Step 01 - Remove OEM Weather Strip 9:57 - FRONT | Step 02 - Remove Undertray 10:12 - FRONT | Step 03 - Bolt Splitter in Using 2 Rear Factory Holes 10:27 - FRONT | Step 04 - Bolt Splitter in place 10:48 - FRONT | Step 05 - Install Chicago Bolts 11:09 - FRONT | Step 06 - Install reinforcement bracket 12:11 - FRONT EXTRA | Step 08 - Layout Nuts, Bolts & Winglets 13:09 - FRONT EXTRA | Step 09 - Bolt in Winglets 13:40 - Outro ----- Get in contact with us if your interested in getting a Flow Designs Splitter kit installed on your vehicle. All splitters have a 10 year warranty and are made from a thick polyethylene composite, making it the strongest product of its type on the market. #flowdesigns #hyundaii30n #exclusivewraps