How to Replace Front Parking Brake Cable 2005-2014 Toyota Tacoma

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-207-Q This video shows you how to install a new front parking brake cable from TRQ on your 2005-2014 Toyota Tacoma. Estimated installation time for a professional technician is approximately: 1 hour 18 minutes This repair was done on a 2010 Toyota Tacoma Base 2.7L Standard Cab Pickup 2-Door 4WD Manual and the process should be similar on the following vehicles: 2005 Toyota Tacoma 2006 Toyota Tacoma 2007 Toyota Tacoma 2008 Toyota Tacoma 2009 Toyota Tacoma 2010 Toyota Tacoma 2011 Toyota Tacoma 2012 Toyota Tacoma 2013 Toyota Tacoma 2014 Toyota Tacoma 2015 Toyota Tacoma Tools you will need: • Pry Bar https://trq.video/oadX-1AXAA00020 • 10mm Wrench • 12mm Wrench • 10mm Socket • 12mm Socket • Needle nose pliers • Needle nose pliers • Ratchet • Socket Extensions • Gloves https://trq.video/obuI-1AXSS00048 • Marker / Writing Utensil • Safety Glasses Subscribe:    / @trq   Check out our playlist: Toyota Tacoma 2005-15 2nd Gen:    • Toyota Tacoma 2005-15 2nd Gen   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.