How to Remove a Mass of Metal Stuck in a Crucible
When metal becomes stuck in a crucible it must not be pried out because it will damage the flux coating and possibly remove some of the crucible surface which will weaken it and possibly cause it to crack. What needs to be done, is to heat it up with a torch until the metal frees itself and can be dumped out.
▶︎
A Quick Introduction to My New Vacuum Casting System
▶︎
Talking about crucibles - How to properly temper a crucible?
▶︎
Crucible numbers deciphered
▶︎
CRUCIBLE CARE AND MY EXPERIENCE WITH CRUCIBLES
▶︎
How to Remove Fire Stain from Silver
▶︎
Revealing The SPECIAL TECHNIQUE Of A Pakistani Man To EXTRACT GOLD From Used Motherboard Waste
▶︎
How to Clean Out a Crucible - Melting Down Gold and Silver
▶︎
Sand Casting Comparison Using Delft Clay and Petrobond
▶︎
How to prepare a crucible for metal melting. Tempering a crucible with Borax.
▶︎
Seasoning (tempering) Graphite Crucibles with Borax
▶︎
Perfect Mirrored Bar - Plug Perfection - Trash To Treasure - ASMR Metal Melting -Steel Copper Alloy
▶︎
How To Use BORAX To Remove Impurities from your Silver or Gold When Melting & Pouring
▶︎
Don't Throw Away Old Spray Paint Cans 😱! Turn It Into a MILLION-DOLLAR Tool! | DIY Hacks
▶︎
Using BORAX To Clean My Melt Dish
▶︎
Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #5 #adamrose #smartworkers
▶︎
Devil Forge Furnace and Preparing the Crucibles for the first melt
▶︎
Fast & Easy Way to Prepare Your Crucible for Casting
▶︎
How To Prepare My Favorite Ceramic Crucible for Pouring Ingots
▶︎
Casting SALT like Metal - What Happens?
▶︎