Ebonised Beech and Sapele Urn Part 2: Ebonising with Vinegar and Steel Wool

In this video I begin the process of ebonising the Beech wood parts of this urn. Since I'm using an Iron Acetate solution I need to add a concentrate of tannin to the wood as it doesn't contain a large amount naturally. I prepared my own tannin concentrate specially for this project. Most people would use tea but I used something different to produce a higher concentration. It worked perfectly!! I start by saturating the wood with the tannin and leaving it to soak in and dry. Once dry I saturate the wood with the Iron Acetate solution that I prepared a week earlier. The ebonising reaction begins almost immediately. After a few hours the reaction is complete and the piece is dry. The grain raised slightly so I added another coat and left to dry again before finishing. I followed the same procedure for the lid after reshaping slightly as the piece had cracked while drying. Finally I bored a mortise for the finial I have planned to cap this piece. In Part 3 I'll smelt some pewter into a blank and use pot to turn a finial that will compliment the ebonies wood. Make sure to Subscribe so you don't miss that update. Thanks for watching, special thanks to those who have already Subscribed. If you havn't already remember to Subscribe. Leave me a comment and give me a thumbs up so if you liked this video. Feel free to share too, in fact, i encourage it! MUSIC CREDITED TO: Fantasy by Del   / del-sound   Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0) https://creativecommons.org/licenses/... Music provided by Audio Library    • Fantasy – Del (No Copyright Music)