Добавление ключа в Тойота Prius 20й кузов, за 3 минуты самостоятельно. Прошивка нового ключа в приус

If you only have one key for a Toyota Prius 20, you'll need to buy it and program it into the car's system to add another. Keys on the market cost between 1,000 and 2,500 rubles; thanks to cutting, they've become more affordable. To add a key, you need to perform a simple key programming procedure yourself, which takes just 3 minutes and doesn't require any additional devices or tools. You can do it yourself very quickly and easily. Leave a review and like the video if you found it helpful. Speaker, computer, and laptop repair in VLADIVOSTOK, HDD25.ru (http://hdd25.ru/) Programming procedure: Programming a new key: (The procedure must be completed quickly (if I'm not mistaken, steps 1 through 9 take no more than 45 seconds)) 1. The key is not in the slot, the driver's door is open, and the other doors are closed but unlocked. 2. Insert/remove the original key into/from the slot twice (leave it uninserted). 3. Close/unlock the driver's door twice (leave it open). 4. Insert/remove the original key into/from the slot once. 5. Close/unlock the driver's door twice. The third time, only close it. 6. Insert the original key into the slot (do not remove it). 7. Turn on the power (do not press the brake) and immediately turn it off. 8. Remove the key from the slot. 9. The central locking system should automatically lock/unlock the doors once (this means you are in programming mode). 10. Press any button on the original key. 11. On the new key, press both buttons (LOCK and OPEN) simultaneously for 1-2 seconds and release. 12. Press and release the OPEN button. 13. The central locking system should lock/unlock the doors once. 14. Once programming is complete, open/close the driver's door to exit programming mode. Programming the immobilizer of a new key: (The procedure must be completed quickly (if I'm not mistaken, steps 1 through 6 take no more than 45 seconds)) 1. All doors are closed (but not locked), and there is no key in the slot. 2. Insert/remove the key (original, programmed) into the ignition switch four times. On the fifth attempt, insert the key but do not remove it. 3. Open/close the driver's door six times. (On the sixth attempt, leave the door closed.) 4. Remove the original key from the slot. 5. The immobilizer LED should be lit (not blinking). 6. Insert the new key into the ignition switch and leave it there for one minute. 7. The IMMO LED will blink for a minute. Once the key is programmed, the LED will go out. 8. Remove the new key and turn off the car.