946C Soldering Hot Plate - Unbox and Test
Soldering hot plate was the natural next step, knowing I would have to reflow a 2nd copy of the TileMap did give me a bit of a push. 0:00 Introduction 0:32 Unboxing 1:52 Safety Check 3:00 First Test 5:33 Soldering 6:45 Inspect
▶︎
Let's build a BlueSCSI with this (dangerous) hot plate!
▶︎
#52 - ANSAI/BOZAN 946C+ - 800W Electronic Hot Plate Review and soldering experiment 👀
▶︎
946C SMD Hot Plate for Rework Pre-Heating or Reflow Soldering
▶︎
My First Attempt at Hot Plate Soldering
▶︎
Reviewing a $64 Surface Mount Hot Plate Soldering solution
▶︎
How to do SMD Reflow Soldering properly! || Hot Air VS Sand VS Reflow Oven
▶︎
The Best way to Solder? Hot Plate to the rescue! (DIY or Buy)
▶︎
Voltlog #210 - 946C Hot Plate Review & Teardown
▶︎
Soldering BGA with a hair dryer
▶︎
Unboxing a Soiiw 'Upgraded' 800W Soldering Hot Plate
▶︎
ix5 Ultra SMD Heizplatte im Test - hot plate
▶︎
Teardown And First Test Of A Soldering Hotplate! (946C First Look)
▶︎
Improve - DIY hotplate
▶︎
Uyue 946c Phone Repair / SMD Reflow Hot Plate Review and Upgrade
▶︎
Testing a 15x15 cm 400 W hot plate for SMD soldering
▶︎
Homemade Reflow HOT Plate - Version 2 | Low Cost
▶︎
The Surprising Flaws in 18650 Lithium-Ion Batteries
▶︎
Learning to solder with a preheating plate | Yorkville LED2 | UYUE 946C
▶︎
How To Build A Solder Reflow Oven - The Byte Sized Engineer | DigiKey
▶︎