xTool O1 Omni UV Printer -- UV Printing on 3D Prints

** UV Printing on 3D Prints ** The xTool O1 Omni will add vibrant colors to your 3D prints! I tested it on PLA, PETG, Transparent PETG, and TPU. All the 3D prints were 80mm x 50mm x 4m thick. I used the same UV settings for all: 1 White + 1 Color + Gloss. (I’ll try the Transparent PETG again with just CMYK to see if it stays a little more transparent that way.) The UV ink adheres well and the prints do not scrape off. I’m especially excited about printing on TPU. The print didn’t crack even when I flexibed the TPU, which opens up all sorts of possibilities for custom cell phone cases and other fun ideas. I used the standard UV head with the rigid white ink, so this can be done on ALL of the O1 Omni models. I'll post full tutorials for the O1 Omni soon - subscribe and keep an eye on the channel so you don't miss it! Get your xTool O1 Omni Printer here: https://www.xtool.com/pages/the-best-... Join the xTool O1 Omni Official Facebook group to learn more:   / 1369975394262258   #O1betatester #xtoolo1 #xtoolomniprinter #PrintAnything