honda pilot coolant change 2006 2007 2008

honda pilot coolant change 2006 2007 2008 including the lengthy chilton method of bleeding the coolant 7mm inner diameter tubing http://tiny.cc/jvycvz 0:00 preparation to draining coolant 0:09 drain radiator 0:58 install tubing on radiator drain outlet 7mm ID tubing x 3.5ft long 1:11 loosen drain plug 22mm socket 1:33 old coolant vs. new coolant appearance 1:46 drain engine block engine block drain cock location 1:60 loosen engine block drain cock 12mm socket + 9" cheater bar 2:08 install tubing on engine block drain cock 7mm ID tubing x 3.5ft long 2:27 tighten engine block drain cock 7.4ft lbs 2:40 coolant reservoir location 2:59 drain coolant reservoir 3:15 honda extended life coolant type 2 3:24 add coolant 1 gallon 2 quarts 13 ounces 3:30 steps 1-6 bleed air out of cooling system 3:38 steps 7-10 bleed air out of cooling system 3:54 radiator fan locations 3:62 step 1 4:15 check thermostat open by temp of radiator hose 4:33 watch engine temp - not more than half-way 5:01 step 2 5:35 measure interior temp by rear heat vents 5:45 step 7 6:07 step 8 6:17 air flow temp vs. interior temp graph 6:36 listen for water flow near rear heat vents 6:51 fill coolant reservoir, max + 14 additional ounces 7:17 pour off excess coolant once car and coolant have cooled