LED Firework build

How I built my own LED firework using pebble lights. STRUCTURE • Porcupine ball- Amazon https://a.co/d/ep7WGut • Spokes (tomato cages from local hardware store were used in this video) • ½ PVC pipe- cut to 2.5” sections- from local hardware store • ½ PVC pipe caps- from local hardware store • Some method for the base. I’m using an umbrella stand with a ½ metal conduit running inside a 2” metal conduit. • Zip ties • Liquid nails or hot glue WIRE COMPONENTS • LED pixels. I used seed, or pebble LEDs. You can use strips or nodes, but I prefer the pebbles because they are cheap and easy to work with. I chose 12v from this site https://pixelparadiseusa.com/product/12v-s... , but they can be ordered anywhere. Make sure you order WS2811 addressable lights. I also was careful to select pebbles that could be cut anywhere within the string. Some pebbles can only be cut at every 3rd string. • 3 conductor electrical wire- Amazon https://a.co/d/fZIb3fN • 3 wire quick-connect (optional)- Amazon https://a.co/d/exurDTT • Solder sleeves- https://www.wiredwatts.com/stred-red-solde... ADDITIONAL COMPONENTS TO MAKE IT WORK (NOT SHOWN) • X-connect pigtails- Amazon, Wired Watts, Your Pixel Store, etc. • Dig-Quad LED Controller- https://www.drzzs.com/shop/digquad/ • 12v Power supply- https://www.wiredwatts.com/ps12v350wm • WLED software (download free) https://kno.wled.ge/