Programming an eeprom with a CH341A and flashrom.
"flashrom" is an open source software that runs on Mac and Linux operating systems and additional on Windows with restricted functionality. I use it primarily for driving a CH341 SPI EEPROM Programmer. The video is a talk through of using the software while demonstrating the programming of a Winbond 25Q64FV eeprom. Primarily the aim of this video is to hopefully help those of us unaccustomed to: a) programming eeproms on a regular basis. b) Using the "Terminal" window and typing the instructions
▶︎
Remastered: How to use a BIOS flasher w/ Test clip to flash BIOS and EEPROM chips in Linux/Windows
▶︎
how is this hacking tool legal?
▶︎
EEVblog 1524 - The 10 CENT RISC V Processor! CH32V003
▶︎
Programming an eeprom with CH431A and Asprogrammer
▶︎
Using CH341a to recover a mobo I bricked - LFC#279
▶︎
I Hacked This Temu Router. What I Found Should Be Illegal.
▶︎
How to Crack any Software
▶︎
Volt-modding the CH341a Mini Programmer - LFC#278
▶︎
CH341A EEprom Programmer Review and Practical Use Instrument Cluster Repair
▶︎
Recover Bricked BIOS using FlashRom on a Raspberry Pi
▶︎
Learn to read a SPI with CH341A using 8 software versions.
▶︎
STM32 Guide #2: Registers + HAL (Blink example)
▶︎
How to Read & Write Hard Drive & Computer BIOS Firmware to SPI Flash Memory Using CH341a Programmer
▶︎
Extracting Firmware from Embedded Devices (SPI NOR Flash) ⚡
▶︎
Introduction to Firmware Reversing
▶︎
Programming a Motherboard's BIOS chip - UEFI Crash Course Part 1
▶︎
How to use a BIOS flasher w/ Test clip to flash BIOS and EEPROM chips in Linux & Windows
▶︎
How to update BIOS using Linux
▶︎
Secure Boot Certificate Expiry (Windows & Linux)
▶︎