como ARMAR un CUBO RUBIK ULTIMA CARA / como HACER la ULTIMA CAPA

Contact Gmail (only important matters): [email protected] Instagram:   / _marcube_   Hi everyone, today I bring you the last chapter on how to solve the Rubik's Cube (the times are in the description and the algorithms are here) MAKING THE CROSS ON THE LAST LAYER 1. Identify which step the cross is on (L-line-dot) 2. If it's on the L, look for an edge that has a yellow edge to its right or left 3. If it's on the line, use any edge except those that form the line 4. Repeat the following algorithm to go from (dot to L, from L to line, and from line to cross) 5. Algorithm: Take the layer that is currently facing us (refer to the video), turn it to the right, turn the right face up, turn the top layer to the left, turn the right face down, turn the top layer to the right, and Return the face that is looking at us. MAKE THE EDGE COLORS MATCH THEIR CENTERS 1. Find an edge that matches the center color (ONLY ONE). If they match, 2. Rotate the top layer to make only one edge match. (If you rotate the top layer and still can't get only one edge to match, repeat the algorithm from any side and rotate the top layer until one matches.) 2. Algorithm: Right layer up, top layer to the left, lower the right layer (reversing what you just did), rotate the top layer to the left again, raise the right face to the top, and rotate the top layer to the left until the colors match. 3. If doing this once doesn't align all the edges, repeat. HOW TO PLACE THE CORNERS 1. Find a corner that is correctly positioned (WITHOUT ROTATING THE TOP LAYER, ONLY THE CUBE). If none match, do the following: The algorithm from any corner 2 ALGORITHM: rotate the top layer to the left_ raise the right face_ rotate the top layer to the right_ raise the left face_ rotate the top layer to the left_ lower the right face_ rotate the top face to the right_ lower the left face 3 If the other corners do not match when performing the algorithm, repeat 4 (It doesn't matter if the corners are rotated) they are rotated in the next step ROTTING THE CORNERS 1 Turn the cube upside down so that the last layer we were assembling is facing down 2 Find a corner that is rotated 3 Perform the following algorithm until the two colors match (the corner and the face) 4 Algorithm: Raise the right layer (always keeping the rotated corner on the bottom of the right face) rotate the top layer to the left_ rotate the right layer down_ rotate the top layer to the right and repeat until you reach step 3 – rotate the bottom layer until you have another rotated corner on the right-hand layer and repeat the algorithm until it's solved. I DESERVE A LIKE AND A SUBSCRIPTION FOR WRITING 2848 LETTERS. THANK YOU. How to SOLVE a 3x3 RUBIK'S CUBE / EASY / How to SOLVE a RUBIK'S CUBE last layer How to SOLVE a RUBIK'S CUBE LAST FACE / How to MAKE the LAST LAYER