【簡単】ダイソーショットを改造して飛距離と強度を上げる #DAISO #ヘビーシンキングペンシル #Dショット

It can throw up to 100m! Maintains balance! (Depending on the PE and tackle conditions) Monster Shot 95 is 40g Daiso Shot 100 is 33(32)g In comparison, When blown by the wind, it loses its balance and loses distance It's too light for PE No. 2 and above, so it doesn't cast as far The difference in plastic thickness makes it less durable I was worried about the weights losing balance ↑Resolved! Daiso, please keep drills and resin on the shelves (lol) [Work Precautions] Wear protective gear Always wear vinyl gloves (double gloves recommended for thin gloves) and a mask. Avoid contact with nails and skin. Ventilation To prevent illness from volatile components, thoroughly ventilate the area by opening windows, etc. Avoid working in enclosed spaces. Clothing Wear clothes and an apron that can get dirty. ・Protecting the area Resin liquid is difficult to remove from clothes or the floor, so protect it with newspaper or protective sheeting. [How to handle resin liquid] ・Do not touch with bare hands Never touch with bare hands as it can cause allergies and dermatitis. If it gets on your skin, wipe it off immediately and wash with soap. ・Avoid thick application If you apply too thick a layer at once, light will not reach the center and it will not harden, so apply multiple layers. ・Proper curing Uncured resin will be sticky, so let it cure completely until it is no longer sticky. UV lamps reach high temperatures, so do not touch it immediately after curing. [Post-curing/Other] ・Heat Works will be very hot immediately after curing, so allow it to cool, taking care not to burn yourself. ・Disposing of uncured resin Even after wiping it off with tissue, ingredients may evaporate. Be sure to ventilate the area and dispose of it according to local regulations.