Улучшаем автозвук в Aito Seres M7: разбор штатной аудиосистемы, установка сабвуфера и шумоизоляция

All our contact information (you can write to us) is https://boodru.taplink.ws Bloodhound website is https://bood.ru/ Phone: +7 (901) 373-44-16 How to improve the sound in your Aito Seres M7: disassembling the stock audio system, installing a subwoofer, and soundproofing Welcome to our video, where we conduct a complete disassembly of the Aito Seres M7 audio system, discussing its features, shortcomings, and the upgrade process. If you own this car or are simply interested in improving the sound in your car, then this article is definitely for you! In the video, we explain how to transform the stock speakers into a professional audio system that will delight you with every note. Features of the Aito Seres M7 stock audio system The Aito Seres M7 is a Chinese car with interesting technical solutions, but the sound quality leaves much to be desired. The brand's official website contains conflicting information: the car has either 13 or 15 speakers, and even mentions a subwoofer, which in fact doesn't exist. This caused confusion among owners, so our specialist decided to conduct a detailed analysis. During our analysis, we discovered that the front doors are equipped with a two-piece speaker system: 16 cm midbass speakers and midrange speakers. High-frequency speakers (tweeters) are located in the windshield pillars. The rear doors are equipped with smaller midbass speakers and tweeters. The car also has a center channel speaker, which turned out to be difficult to remove. The factory audio system's amplifier is located in a recess where a subwoofer could theoretically be located, but its power ratings are unknown. All speakers are wired individually, but their quality and design leave much to be desired. The standard system's sound is weak, lacking the pronounced bass and depth typical of most basic systems. How can I improve the sound in the Aito Seres M7? We took a comprehensive approach to upgrading the audio system. The main stages included replacing the stock speakers, installing a subwoofer, soundproofing the doors, and adding a processor amplifier for precise sound tuning. Speaker Replacement and New Equipment We installed Focal K2 Power speakers in the front doors. These high-quality midbass, midrange, and tweeter speakers deliver deep sound with excellent detail. For the rear doors, we chose Focal Flux speakers, which are connected via the stock crossover. The focus is on creating a surround sound experience for the front passengers. For amplification and sound tuning, we used a Match UP10 processor amplifier. This powerful, energy-efficient device allows you to customize the sound to the individual preferences of the driver and passengers. A 10-inch Focal subwoofer was also installed, providing rich and clear bass. Subwoofer Enclosure Fabrication and Installation The subwoofer enclosure was handcrafted from 16mm thick MDF. We followed all the speaker manufacturer's recommendations to ensure the optimal enclosure volume—approximately 15–17 liters. This approach allows the speaker to reach its full potential. The enclosure was coated with a moisture-resistant varnish to protect against moisture and ensure a water-tight seal, and was equipped with stiffening ribs to prevent deformation. Door Soundproofing One of the key stages was eliminating noise and vibration. The car had virtually no stock soundproofing, so we carefully sealed the doors and door panels. Using two layers of soundproofing materials helped achieve acoustic comfort and improve speaker performance by eliminating vibration and excess noise. Precise sound tuning with a processor The Match UP10 processor allows you to customize the audio system for a perfectly balanced sound that matches the owner's preferences. We've created several presets for different scenarios: for the driver, passengers, and even children. This allows you to enjoy high-quality sound in any conditions, regardless of the listening position in the cabin. After all the improvements, the Aito Seres M7's factory audio system has been transformed. The sound is clear, deep, and balanced, with pleasant bass and vibrant highs. Now even the most demanding music lovers can enjoy the ride. Sound insulation adds comfort by eliminating background noise, and the processor amplifier provides flexible settings and a personalized approach. The factory audio systems in most cars, especially in Chinese-brand models, rarely satisfy true connoisseurs of high-quality sound. Upgrading the acoustics not only allows you to enjoy your favorite music on the road but also emphasizes the vehicle's individuality. Thanks to modern technology and a competent approach, you can achieve professional sound even in a basic car.