Sailboat Tour of a TP52 "Destroyer" - ep20 #retroboat - #sailinganarchy with Scot Tempesta

visit https://www.sailinganarchy.com Destroyer is a 2005, Bruce Far designed TP52 that was built in New Zealand by Cookson Boats of carbon fiber epoxy pre-preg with a Nomex core sandwich construction. Foam coring was used up forward in the "slamming areas" for added strength. Vacuum-bagged throughout with carbon/foam infused interior structure. with monocoque type construction forward of the mast. The interior arrangement has been simplified to its racing functionality. The resulting weight savings was used to congregate weight centrally in the boat to reduce pitching inertia and allow some exchange of volumes between appendages and hull. Destroyer was built to ABS Offshore Racing Guidelines and is one of the few TP52s that is set up for offshore racing. This has been proven time and again with 3 Transpacs, Cabo, Ensenada and So Cal 300 races under her belt. Deck was completely redone in 2018-2019 with all stanchions and push-pits removed, sanded and painted. The Harken winches were serviced as well as all of the deck hardware removed prior to paint. A new non-skid deck was sprayed on and the cockpit received soft SeaDek flooring. All inspection ports in the cockpit and the deck prisms were either repaired or replaced. The engine is a Yanmar 40 HP (4JH4E) diesel sail-drive. The lower sail-drive unit was replaced in June of 2018. Engine overhaul n Spring of 2019 included new fuel lines, heat exchanger and exhaust manifold along with the servicing of all filter etc.Destroyer has a bronze 2-blade folding Gori propeller. Current engine house as of August 2019 are: Destroyer has been outfitted and updated with all of the latest safety equipment needed for offshore racing