How to Replace an Outer Tie Rod End (Any model)

Hey this is a basic video of how to replace an outer tie rod end on any model! tools needed below ⬇ Tools & Equipment Needed ( SPECIFIC MODEL FOR THIS VIDEO Mitsubishi Lancer – may vary by model): 🔧 Wrenches: 19 mm wrench 22 mm wrench (Note: Your specific car model might require different sizes, but you’ll need at least two different wrenches or similar tools to turn the nuts.) 🔩 Breaker Bar: 17 mm breaker bar / RATCHET / WRENCH WHATEVER WORKS FOR YOU !! (for the upper nut holder) 🛠️ Other Tools: Ratchet Sockets (sizes may vary depending on your car model) Penetrating oil Blowtorch or heat source (optional – if bolts are stuck) Jack Jack stand (for safety) 🦺 Safety Equipment: Protective gloves Safety glasses Wheel chocks (place behind wheels to prevent movement) Engage gear (for manual cars) or park (for automatics) Activate the parking brake ⚠️ Always think about your safety! Make sure the car is secured properly before working under it. Never rely on just a jack—use a jack stand and secure the wheels.