Как происходит петлеобразование на ткани в оверлоке Yamata FN10-4D. Видно №50.

My RUTUBE https://rutube.ru/channel/33121931/ How loop formation occurs on fabric in the Yamata FN10-4D overlock. You can see #50. How loop formation occurs. Installing knife holders. 00:00 How the right looper should approach the needles. 01:42 Pay attention to the mandatory threading of the loopers. 02:10 How the left looper approaches the needles and takes the loop from the needles. 02:51 How the right looper takes the loop from the left looper. 03:21 How the needles grab the thread from the right looper. 03:53 How to install the lower knife holder and the lower knife. 05:39 How to install the upper knife holder and the upper knife. 08:30 We sew, check how the knife cuts and how the overlock makes a line. Master Universal sewing machines repair training. More than 877 videos on repairing household and industrial sewing machines. Each brand of machine has its own playlist. Each video has its own number. Go to the playlists, select the desired brand of machine, there are all the videos on repair. My contacts. Mail: [email protected] VKontakte: https://vk.com/id329324685 Website: http://vadelina.ru/ Section: For those who sew. Twitter   / master_univer   Blog http://masteruniv.blogspot.ru/ My RUTUBE https://rutube.ru/channel/33121931/ Page of training videos: Do it yourself! http://vadelina.ru/dlya-tekh-kto-shet/ Devices for sewing in a long zipper. Devices for edging fabric edges with bias tape. Devices for making bias tape. Snail for double turning of fabric edge. DIY edgings: for EVA car mats, in three folds, in four folds, for difficult-to-slide materials of leatherette, see here http://vadelina.ru/dlya-tekh-kto-shet/ Sewing machine with double feed and walking foot: Installing the shuttle, factory adjustment of the needle bar http://vadelina.ru/ustanovka-chelnoka... Adjusting the overstitching. Adjusting the eccentrics of the walking foot and the toothed feed dog http://vadelina.ru/kak-otregulirovat-... Industrial sewing machine class 862: http://vadelina.ru/dlya-tekh-kto-shet/ How to install and adjust the tension and release mechanism of the upper thread. How to set the eccentric for feeding and lifting the toothed feed dog. How to change the bronze gear and bearing on the shuttle roller. How to install and adjust the shuttle. How to install and adjust the shuttle take-off. Typical GK 6150H and other similar machines: see here http://vadelina.ru/kak-postavit-cheln... How to install the shuttle, set the factory setting of the needle bar and adjust the eccentric. on Typical GK 6150H and other similar machines. Setting up the Podolsk sewing machine for thick leather and thick shoe threads. Supplement to setting up the Podolsk machine for thick threads and thick leather. Setting up the Chaika 142M and Podolsk 142 machines for thick leather and thick shoe threads, See here http://vadelina.ru/dlya-tekh-kto-shet/ sewing machine, sewing machine, sewing machine repair, sewing machine setting, thick threads, thick leather, how to sew thick leather, sewing house, sewing repair, machine setting for leather, Podolsk sewing machine