Réaliser un pont ou double renvoi à la cintreuse d’établi

How to make a bridge or double bend with a benchtop bender. Making a double bend. Step-by-step tutorial. Learn how to make a bridge or double bend on a single copper pipe. Work according to professional standards. Plumbing Heating In this video, the height of the obstacle is less than 5 cm; the desired height is 3 cm. ________________ Tools for making the bend: ______________ square benchtop roll bender tape measure ________________ Chapters in this video: _____________________________ Here is the step-by-step tutorial. 0:23 Draw the starting dimension 0:38 Equip the bender with the chosen diameter 0:49 Place the dimension opposite the 0° axis on the handle side 1:15 Bend the tube to 30° 1:47 Turn the tube over 2:04 Adjust the height 3:00 Bend the tube to 30° 3:42 Check the return 4:00 Mark the end of the bend 4:10 Align the Mark with the first tube 4:22 Mark the axis of the last obstacle on the tube by aligning the axes 5:14 Place the dimension opposite the 0° axis on the handle side 5:43 Bend the tube to 30° 5:55 Turn the tube over 6:12 Adjust the height 6:50 Bend the tube to 30° or until the tubes are parallel 7:14 Check the alignment 7:21 Position the part on the obstacle ________________ Tool links _________________________________ Square: https://amzn.to/3XvlkPD Roll bender: Measuring tape: https://amzn.to/3H8V2g2 ________________ Information ________________________________________ How to determine the height of a turnout or bypass    • Déterminer la hauteur d'un contournement,...