Woodturning Inside Out 3 Stave Art Flame

http://www.AsWoodTurns.com I had not completed a triple inside out turning for quite a while. So, after seeing Dale Dallon demonstrate an inside out flame, I had to jump back into it and incorporate the refinements I saw in his process. Some of the refinements include: using CA glue dots to hold the first set of staves together using strapping tape for security cutting a groove for alignment when reversing rationalizing the wood preparation based on American Woodturner February 2010 Some facts: Board thickness(y) divided by 1.732 or thickness times 0.577 = distance to first cut(x). For a given board thickness(y), board width of 7 times x plus 2 saw kerfs is needed where x is the distance to the first cut. Subsequent cuts are 2x or y divided by 0.866 or y multiplied by 1.155 A digital angle gauge is a great tool to set blade tilt. Enjoy! Blog: http://www.AsWoodTurns.com FB:   / aswoodturns   Music: Traumerei by Shumann performed by Becky Schlappi. Used with permission.