FNIRSI DST-210: мультиметр, осциллограф и генератор сигналов в одном устройстве

📦 FNIRSI DST-210 Multimeter, Oscilloscope, and Generator: https://s.click.aliexpress.com/e/_c4E... ▬▬▬ 📦 FNIRSI DST-210 Multimeter, Oscilloscope, and Generator: https://ali.click/h79rt1?erid=2SDnjce... ▬▬▬ 📦 RD6012P DC-DC Voltage Converter: https://alii.pub/76hd7l?erid=2SDnjeSdbJL ▬▬▬ 📦 UNI-T UTG962E Signal Generator: https://alii.pub/72whks?erid=2SDnjc35FVM or https://alii.pub/72whld?erid=2SDnjcAVBu5 ▬▬▬ 📦 Power-Z KM003C USB Type-C Tester: https://alii.pub/72wwh9?erid=2SDnjdHH7mu ▬▬▬ 📦 ANENG AN8009 Multimeter Analog to the Richmeters RM111: https://alii.pub/72whiu?erid=2SDnjeG3qXR ▬▬▬ 📦 YAOREA YR1035+ Tester: https://alii.pub/72xek9?erid=2SDnjdZypd1 ▬▬▬ 📦 Lutron TM-902C Electronic Thermometer: https://alii.pub/72whoh?erid=2SDnjdGEf1u or https://alii.pub/72whpg?erid=2SDnjdR8ahy ▬▬▬ ✉ Telegram channel: https://t.me/+BIOQ_ig6nOw3OWUy ▬▬▬ FNIRSI DST-210: Multimeter, Oscilloscope, and Signal Generator in One Device. This is a review of the FNIRSI DST-210 portable multifunctional measuring device. It combines a 19,999-sample multimeter, a single-channel oscilloscope with a 10 MHz bandwidth and a sampling rate of 48 Msa/s, and a signal generator with a maximum frequency of 50 kHz. The FNIRSI DST-210 comes in a branded cardboard box. The package includes: • the multimeter itself; • a set of probes with leads; • P6100 100 MHz oscilloscope probe or probe with a 10-fold divider and a standard BNC connector; • Alligator clips with a BNC connector; • USB A to USB C cable for charging and flashing the device; • Screwdriver with color-coded rings for the probe; • And detailed instructions with pictures in Chinese and English. The multimeter measures 178 x 87 x 34 mm. The BNC connectors protrude by just 1.5 mm, and the rotary switch by 7 mm. It weighs 300 grams. Power consumption of the FNIRSI DST-210 with maximum display brightness. Supply voltage is 4.2 V. In multimeter mode, consumption averages 950-960 mW. With the buzzer activated, consumption is 1.15 W. In oscilloscope mode, power consumption is 980 mW with the electromagnetic relay disabled, meaning it operates with a sensitivity of up to 200 mV per cell. At a sensitivity of 500 mV per cell or higher, the relay is activated, and power consumption increases to 1.21 watts. The FNIRSI DST-210's voltage measurement accuracy is very good for a budget multimeter, especially in the range of up to 20 volts. The True RMS function works well at 50 Hz. The difference in readings ranged from 0.15 to 0.35%. At voltages below 200 mV, the difference in readings ranged from 0.3 to 0.55%. At higher voltages, the difference was less than 0.2%. 0:00 Introduction 0:40 FNIRSI DST-210 Package Contents 1:23 Probes and Wires 2:13 Appearance, Dimensions, and Weight 3:59 FNIRSI DST-210 Inside 06:19 FNIRSI DST-210 Power Consumption 07:53 FNIRSI DST-210 Firmware 08:42 First Launch and Settings 11:29 Automatic Multimeter Mode 13:44 LIVE Contact Phase Detection Mode 14:04 Voltage Measurement Mode 21:27 Frequency Measurement Mode 22:28 Resistance Measurement Mode 23:43 Continuity Test 24:51 Diode and LED Test 26:21 Capacitor Capacitance Measurement Mode 27:53 Temperature Measurement Mode 29:03 Current Measurement Mode 31:32 FNIRSI Oscilloscope DST-210 45:30 FNIRSI DST-210 Signal Generator 49:14 FNIRSI DST-210 Charger ▬▬▬ Make money on Aliexpress: http://got.by/24utjm ▬▬▬ Make money on YouTube: http://goo.gl/uuHT70 ▬▬▬ Aliexpress Android app: http://goo.gl/zRvQXf ▬▬▬ 💗 Likecoin – coins for likes: https://likecoin.pro/@demalit/pcg8/yeb9 #mrdemalit Advertising: OOO "ALIBABA.COM (RU)" INN: 7703380158