This Simple Mod Makes a Huge Difference on my BMW R1300GS!

Swapping the OEM side stand on the BMW R1300GS for something a bit more solid — here's how the NICECNC Extendable Side Stand went on, and what I think after 2,500-3,000 miles running it. Full disclosure: NICECNC sent me this side stand free of charge for review. All opinions are my own. 🔧 What's covered: Installing the NICECNC Extendable Side Stand (T50 and T30 Torx only — no spring puller needed) How it compares to the AltRider side stand (captive Nylock nuts vs. loose bolts + threadlock) Load testing with full luggage Lean angle at the longest and shortest stand settings 👉 Get the NICECNC Extendable Side Stand here: https://link.nicecnc.com/ytb- thestammeringbiker Use code TSB11 at checkout to save 11% on everything! ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ ⏱ TIMESTAMPS ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 0:00 Intro 0:37 NICECNC vs. AltRider — Nylock nuts vs. bolts 1:30 Tools you'll need (T50 + T30 Torx) 1:56 Installing the side stand 3:09 Refitting the side stand sensor 3:37 Finished install 4:02 Optional stopper swap 4:14 Load test with full luggage 4:27 Lean angle: longest vs. shortest setting 5:00 Final thoughts + where to buy ━━━━━━━━━━━━━━━━━━━━━━━━━━━━ I've had this on the bike for a few thousand miles now including fully loaded touring, and it's held up well. Not perfect — the shortest setting leans the bike more than I'd like — but the captive Nylock nuts give me more confidence than the AltRider setup. 💬 Have you run an aftermarket side stand on your GS? Let me know how it's held up. 👍 If this was useful, a like and a subscribe helps the channel a lot. #BMWMotorrad #BMWR1300GS #NiceCNC #SideStand #MotorcycleMods -------------------------------- 📩 For sponsorship/collaboration enquiries email: [email protected] ----------------------------------- 🌍 Social Media Instagram:   / thestammeringbiker   Patreon:   / thestammeringbiker   ----------------------------------- Affiliate Links 🛍️ Lone Rider: https://www.lonerider-motorcycle.com/... 🛍️ CHIGEE: https://www.chigee.com/THESTAMMERINGB... (Use code THESTAMMERINGBIKER at checkout for 10% off) 🛍️ Aoocci: https://aoocci.com/products/c9-motorc... (Use code THESTAMMERINGBIKER at checkout for 22% off) 🛍️ Carpuride: https://carpuride.com/?ref=THESTAMMER... (Use code THESTAMMERINGBIKER at checkout for 30% off) 🛍️ Innovv: https://innovv.com/?sca_ref=9510923.y... (Use code THESTAMMERINGBIKER at checkout for 10% off) 🛍️ Litelok: https://www.litelok.com/THESTAMMERING... ----------------------------------- Timecodes