#20. My CNC - Контроллер DM500 начало. Управление ПЧ H100. Оживляю станок

In this video, I'm starting to explore the DM500 controller. Main control buttons. Menu. Settings. Manual control of machine movements. Spindle control. I'll show you how I connected the H100 frequency converter and how I tried to control the spindle speed. I'll also try to create and run a NC program. Basically, I'll try to bring the machine back to life with the new controller. Email: [email protected] ═══════════════════════════════ Video Sections (Timing/Chapters): 00:00 Trying to Reinvigorate the Machine with a New Controller 00:40 Brief Overview, Main Buttons, Menus, and Settings 04:04 Connecting Stepper Drivers 04:30 Startup and Initial Actions 05:15 Manual Control of Machine Movements 08:08 Connecting the Drive to the Controller 12:14 Drive Settings for Multi-Segment Speed ​​Control 15:28 Entering Settings into the Drive 18:38 Manual Control Spindle 21:49 Manually Prepared Test NC Programs 22:30 Testing NC Program Operation with Movement 24:15 Testing NC Program Operation with Spindle Control 25:57 Software Control of Speed-Setting Outputs 27:07 First Option for Speed ​​Control from SolidCam Using a Postprocessor 32:37 Testing Speed ​​Control from NC Program with M50x M60x Commands 33:30 Problem with M50x M60x Commands 36:14 Second Option for Speed ​​Control from SolidCam Using a Postprocessor 32:37 Testing the Second Option for Speed ​​Control from NC Program on a Machine 41:06 It Works! )) 41:32 End ═════════════════════════════