Two m32’s - Ins/Outs and options

Two M32 consoles with one DL32 In/Out rack INPUTS to DL 32 DL32 AES50A - to MON Console AES50A MON Console AES50B - to FOH Console AES50A INPUT ROUTING ON BOTH CONSOLES - AES50A1-8,9-16,17-24, 25-32 MON Console has GAIN control - set input levels at MON console. FOH has TRIM control to adjust up or down tow suit. OUTPUT Routing FOH Console - AES50A (41-48) 'OUTPUT 1-8' (to send OUTPUTS back to MON Console to be assigned to physical XLR/Aux outs as needed at the stage (either through DL32 I/O or from Mon console XLR's as below. ROUTE what you need to OUTPUT 1-8 as you normally would OUTPUT ROUTING MON Console - AES50 A (1-8) 'OUTPUT 1-8' (to take the MON Console outputs from the DL32 outputs 1-8) AES50 A (9-16) 'AES50B 41-48' (to take the outputs from FOH console from the DL32 outputs 9-16) ALTERNTATIVE ROUTING on MON Console - 'Routing' Tab - scroll to 'XLR' tab (1-4) 'AES50B 41-44' (5-8) 'AES50B 45-48' Allows you to use physical XLR OUTS on MON Console for the MAIN OUTS/Matrix/OUTS from FOH Console - I've seen a lot of videos and was trying to help a friend understand the setup and just felt that another video might be more helpful... I know this is a topic that gets a lot of questions! We run two M32/X32 consoles for many of our shows, and this is how we route it to use the outputs from the IN/OUT unit DL32) for all of the show's outputs. In this video I'll try to succinctly: Discuss how to get inputs from DL 32 into both consoles (for MON/FOH setup) Also discuss setting up outputs from both consoles to come from the DL 32 (1-8 as MON outputs and 9-16 as FOH outputs) Also how to make the physical XLR connections on MON console for signals coming from FOH console